Polyurethane shroud for 7″ angle grinders that can be used for floor grinding.
Quality Polyurethane material makes sure that the shroud stays flexible in all temperatures, allowing them to keep their shape and not warp, so they don’t get bent out of shape.
Each shroud has molded vacuum ports that can be used to connect vacuum lines that are 2.5″ inside and 2.75″ outside.
The lid can be opened from the side so the grinder can get closer to the edge.
The set comes with five adapters that work with the DEWALT, Metabo, Milwakee, Hitachi / Makita, and Blastrac grinders.
Quality Polyurethane material makes sure that the shroud stays flexible in all temperatures, so it doesn’t break or warp. The Premium Shroud for 7″ grinders comes with 5 adapters that fit the DEWALT, Metabo, Milwakee, Hitachi / Makita, and Blastrac grinders, as well as other brands.
Worked well with the changes I made to my 7″ Dewalt grinder. My arbor shank had to have a spacer added to it in order to use the diamond cup wheel I was using. Otherwise, the shroud would be too low for the diamond cup wheel. In this case, you can use a large vacuum hose or adapter that is 2-1/4 inches long. It doesn’t go up or down, and it’s a little rigid, so you have to get everything lined up just right (wheel with bottom of shroud). Part that is hinged is a little hard to raise and lower. To do it again, I’d look for a shroud with more options.
