The 4.0 AMP motor can run at 30,000 RPM for smooth trimming and light routing.
For a clear view of the cutting edge, the base is clear.
Keep the power cord out of the way with a top-mounted power cord.
The design is small and has a rubberized grip for added comfort and safety.
Easy to use rack and pinion mechanism for fine depth adjustments.
Slim design with a rubberized grip for both comfort and control, thanks to its small size.
Compact and light: ( only 3.3 lbs .
An overview of what this item is abou.
Trimmer: 4 A Amps at 120V, 30000 RPM with no load, Toggle Switch. The tool is 7-7/8 inches long, weighs 3.3 pounds, and has a 1/4-inch Collet Capacity. It has ball bearings, a plastic base, and comes with a 1/4-inch Collet, a fixed base, a wrench, a trimmer guide, and a template guide.
There is a Manufacturer.
This 1/4″ laminate trimmer is great at cutting quickly, smoothly, and accurately.
Workpieces are moved at 30,000 RPM by a motor that has a 4.0 AMP charge.
The all ball bearing construction means that the machine will last a long time and run smoothly. The easy-to-use rack and pinion allows you to change the depth of the shot. To make things easier and safer, there’s a transparent base, and the top-mounted power cord is out of the way. For comfort and control, the body of the trimmer is made of rubber.
Afterward, I used this Amazon Cement (DAP 00272 Original Contact Cement Qt Raw Building Material, 1, Tan, 128 Fl Oz) to completely resurface my Daughter’s kitchen counter tops with 80-grit disks.
.
One section (3 X 8) was square. It was 3 X 12 L-shaped with a sink cutout.
.
Nothing to do with the router at all. Zero problems with routers. Great for Formica Laminate with a standard thickness of 1/8 inch. Took two days. It was a great buy. Saved a lot of money.
.
To keep finished edges from getting burned, I used an Amazon oil called Lucas Extreme Duty Refill 4oz Gun Oil 10877 and 1oz Needle Oiler 10875.
.
In this case, I used a Freud 1/2″ (Dia.) Bearing Flush Trim Bit with 1/4″ Shank (42-404).
