If you buy our arbor press, it’s made of high-quality Cast Iron. So its body is very strong and long-term. It can make sure that you have a safe and stable business.
Because this arbor press is so powerful, you can use as much as 0.5 tons of pressure in your work. Adjust the amount of pressure you use to finish installing, removing, or compressing your work pieces. The working height is 3.54in/90mm.
STABLE BASE>: The base of the arbor press has 4 holes for screws to hold it in place. At each of the four slots, the movable machined steel anvil gives precise support for work. Make your work safe and easy.
In the manual press, there is a table with slots for the anvil. It can be used for different things, so if you need something else, you can move and move it.
It is used for a lot of different things, like pressing the bearing and the workpiece together that don’t fit very well.
Examples of these are rivets and punching and bending and other pressing jobs.
A 0.5 Ton Arbor Press is the size of thi.
Our Arbor Presses are simple to use and very good at what they do. Because the body is cast iron, it is strong and durable. The workbench has two holes that can be used to attach different things.
0.5 ton, 1 ton, 2 ton, and 3 ton arbor presses are all available. There is also a Ratchet Leverage Arbor Press1 ton and a Ratchet Leverage Arbor Press2 ton (B08TM8ZZJQ).
It has these features.
Because the base is smooth and flat, it is very hard. This makes it resistant to wear and corrosion.
✔High-hardnes. Serrations: Adjust the spacing a little, which will save you both time and effort when you press down.
Using a labor-saving design, the tightness screw can be used to change the length of the rod.
Processing a Hard Component – Use no deformation to make sure the press lasts.
This tool can be used for many different things, like putting together factory parts, putting in bearings, riveting workpieces, and more. It can also be used for stamping, bending, stretching, and other things.
★Specifications.
Cast Iron is the material of choice for this project.
The maximum height at which you can work is 3.54 inches / 90 mm.
This is the size of the Ram: 18mm by 18mm by 180mm.
This is how big the plate is: 3.54in/90m.
The Throat Depth is 3.2in/81mm.
Weight:20 pound.
What’s in the package.
An arbor press that weighs about 1 to.
One Dirft that is round, flat, or pointy.
Both sides have broken in less than a week. One picture is better than the other one. I emboss and cut through leather that has been used to make tools. That’s all I’ve been able to do in such a short time. Even though this was cheap, both sides of it have already been broken. Because I don’t want to have to hammer all day and night, I bought this.
