These tools can be used for everything from drilling and milling to grinding to polishing to cutting and engraving.
Ideal for electronic hobbyists, model-makers, mechanics, jewellers, opticians, artists, chiropodists, dental technicians, and many other people who make things.
At no load, this tool runs very smoothly at speeds between 5,000 and 20,000rpm. It comes with 6 high precision triple slit steel collets that can be used with this tool.
With a low safety voltage, you can do thing. Because of this, it is also good for working with coolant (wet grinding and cutting.
All that comes with this package: 1 PROXXON Rotary Tool MICROMOT 60 and 6 high precision triple slit steel collets. It’s number: 28510.
An overview of what this item is abou.
Milling, drilling, routing, polishing, cutting, cleaning, brushing, deburring, sawing, engraving, carving, etc. are all things you can do with this tool. It’s a pen-style tool with a diameter of only 35mm (1.4 inches). It has a high level of precision “)) is made in a way that makes it easy to hold and control. He is very quiet because of the special permanent magnet motor, the ground spindle, and the collar bearing. All of these things make his design more comfortable. An efficient cooling system can be used for a long time under different load conditions. Useful for any material that can be worked with, like steel, precious metals, wood, glass, ceramics, plastics, and precious stones. If you are a model builder or a woodworker or a jeweler or an artist or a dental technician or a tool and die maker, this is the best place for you. The MICROMOT 60 devices need a power adapter to work. We think the PROXXON mains adapter NG 2/S is good. We can only control the speed of our 12 volt devices if we use power supplies that aren’t very stable (e.g. all MICROMOT mains adapters). Stable power supply units can be connected to each other. However, the devices will then be able to run at their highest rotational speeds (also applies to operation with batteries). Information about how things work. There is no load on the machine when it runs at 5,000 to 20,000 rpm. It weighs 230g (1.2 lbs), and it is 8 21/32 inches long “. Safety first: 12V DC, 40W input, 12V D.
There is a Manufacturer.
50/E is a Proxxon micromot rotary tool. With a special motor that’s balanced just right, this tool runs very smoothly at speeds that can go from 5,000 to 20,000 rpm (no load). High precision triple slit steel collets are included in sizes 1/32, 1/16, 5/64 and 3/32. These ensure that the bits are held in place for the best concentricity and the precision you need for the best work pieces you can make. Weight: 1.2 pounds, low voltage for best safety.
There are three proxxon tools I have tried. This is the third. I sent the scroll saw and the table saw back. Proxxon makes low-end, low-quality tolls that are sold for a lot of money at very high prices. Your money will be better spent on high-quality tools that cost less.
