Time and energy will be saved by a good helper.
The surface of the teeth gives you good wear life and burrs that last a long time.
Easy to Use: Comfortable and convenient operation makes it easy to get rid of different materials.
It can be used for this: A very rough coating can quickly remove the blank while leaving a fairly smooth finish.
10mm: Can be used with both types115 and type125 Angle Grinder. 14mm: This size is good for types100 Angle Grinder.
Size:10m.
Features.
Time and energy will be saved by a good helper.
The surface of the teeth gives you good wear life and burrs that last a long time.
Easy to Use: Comfortable and convenient operation makes it easy to get rid of different materials.
It can be used for this: A very rough coating can quickly remove the blank while leaving a fairly smooth finish.
As a side note, this is just a picture of a grinding head and not a real grinder.
Specification.
Steel made of carbon.
Black is the color.
About 10mm and 14mm in diameter (Suitable for Angle Grinder.
10mm: Can be used with both types115 and type125 Angle Grinder.
14mm: This size is good for types100 Angle Grinder.
In this case, the diameter of the drill head is about 40 mm/1.6 inches.
About 40 mm/1.6 inches.
Outside diameter of the tool handle: about 25 mm/1.0 inche.
About 108 mm/4.3 inches.
The package came with.
1 *Rotary Milling Head.
I didn’t get even one of the two sizes that were for sale.
It comes in 5/8 and 3/8 sizes. This one was sent to me in the middle.
The angle grinder would have been kept if it at least worked with one of my angle grinders. I have both sizes.
Make sure you check out all the pictures. They don’t match the descriptions on this page, so they don’t belong here.
