In this case, the cutting depth can be changed. The dust cover can cut up to 1.06 inches deep.
In this case, the PC shell is called “Transparent. This dust-proof cover has a transparent PC shell that makes it easier to see and more durable.
In this case, the angle grinder can cut without dust because it has a dust shroud.
There are many people who use this. Dries quickly and is dust-proof. It can be used to cut dry-hanging marble, concrete dust-proof, wall, floor, kitchen table and fiberglass resin board. A 100/125/150mm angle grinder and saw blades with a length of 90,115, or 125mm will fit.
Instructions on how to set up the ap. Adjust the inner diameter of the cover to match the outside diameter of the head. Loosen a screw outside of the machine body. Turn on your angle grinder; then, put on the cover on the head. Make sure the pipe clamp screw is tightened. Make sure the hexagon socket screws on the bracket are tightened as well.
Features.
Captures up to 95% of the airborne dust, so you can cut with an angle grinder without making a mess. The cutting depth can be changed up to 1.06 inches. For better visibility and durability, a transparent PC shell is used. If you have a 100/125/150-mm angle grinder and an angle saw blade that is 90/115/125mm, this will fit. Dries quickly and is dust-proof. It can be used to cut dry-hanging marble, concrete dust-proof, wall, floor, kitchen table and fiberglass resin board.
Specification.
It’s made of PC and metal.
Four-fifthinc.
100mm, 125mm, and 150mm angle grinders can be used.
Cutting Disc Diameter: 90/115/125m.
Installation: Clamping Inner Diameter: 41 to 54m.
Dust Tube: ID 32mm, OD 35m.
Cutting Depth: 3-27mm. You can change it.
17.8×15.8 / 7.0×6.2in is the size.
Instructions for installing.
1. Make sure the inner diameter of the cover is the same as the outer diameter of the head.
2. Gently loosen the screw with the hexagon socket on it outside of the machine body.
3. Put the cover on the head of the angle grinder and screw it in place with the screws.
4. Tighten the screw that holds the pipe in place, as shown.
In step 5, tighten the hexagon socket screws that are on the bracket so that they don’t come loose.
It’s called a “package list..
One Dust Cover
