Buy Ukoke 3.6V Cordless Screwdriver Kit with Ergonomic Handle, USB Rechargeable Li-Ion Built-in Battery, Screwdriver with Dual LED Lights, 33 pcs Accessories (UOSD36)

It’s a must-have tool for your kit. You can change the torque setting on the Ukoke 3.6V Li-ion cordless screwdriver to make your everyday household tasks easier and faster with its 300 rpm speed and 5 N.m torque.

A device that can do it al. It’s great for all kinds of screwing and un-screwing jobs, like installing shelves, fixing fences, putting together furniture, building a wooden dog house, and so on (not suitable for hard surfaces like the wall).

a built-in battery that lasts a long tim. It comes with a built-in 1.3Ah Li-ion rechargeable battery that can last for 40 minutes of work. If you want to charge it quickly, you can use a USB Type-C cable. You can charge it with any device that has a USB Type-C port, such as a laptop, car, power bank, or charger.

At the same time, [Lightweight & Modern Design. It is a very small device with a very modern device. It would be a great gift for someone on vacation or to keep at your office or home. It’s small enough for anyone to use at home. This device has two LED lights and a display screen, which makes it easier to work in dark places.

It is called a “Ergonomic Handle. Say good-bye to tired muscles. You won’t get tired even if you work for a long time because the handle is made of soft rubber, which makes it easy to grip.

Warranty and Package Contents are on this page. Because you get a one-month refund warranty and a one-year replacement warranty, you can shop for it with peace of mind. All of these things are in the package: 1x 3.6V Screwdriver with 28 bits, a magnetic bit holder (6mm), an impact bit, an adjustable bar, a USB cable, and a carry case with hook.

USB Rechargeable Li-Ion Battery, Ergonomic Handle, and Ukoke 3.6V Cordless Screwdriver Kit are some of the things in this set. a screwdriver with two LED lights, 33 piece. Accessorie.

A good choice if you don’t have a cordless drill or don’t have the space to move one. With out a handle, you wouldn’t want this to have much torque. Still a lot of power, but on the lowest setting, it’s still way too powerful for some things, like small wood screws. If you don’t pay attention, it could strip them if you’re not careful. There are smaller screwdrivers for this. When you use a power tool to tighten something, it’s always a little risky. Most drills stop when you let go, but this one keeps going for a while. No big deal, but it could mean that this isn’t the best tool for some types of work. A tool like this would be very useful for disassembly, I’m sure. In my job, I repair electric guitars. I’ll use this tool to take them apart because some guitars have many screws. I’ll have to be very careful when I put them together, because it might have too much torque. Keeps being useful all around, though.

There are a lot of common bits, as well as a few metric drill bits and a few metric nut drivers. This comes in an easy-to-carry plastic case. mm: 7, 8, 9, and 1. A long PH1 bit is also there. Because the Phillips bit has an open end, it’s very easy to lose it under the tool tray in a box. An extra flexible extension comes with the box, but there doesn’t seem to be a place for it. It just kind of floats around in there. The bits are 1/4” hex, and they are held in place by magnets. Some of them don’t fit well, but I’m sure that will get better with time. To get to one of the three different torque settings, you push a button on a little plastic blister. The button moves through them by displaying 1/2/3 lights as it goes. The battery charge will show up if you hold the button for a few seconds. You can turn on two LED work lights on the tip of the tool when you press the button. The lights stay on for about three seconds, so if you need the light to get the bit into a screw, you can do that. There is a rubber cover on the back that doesn’t close very well. The charging port is on the back of the phone. A good idea: I just saw that the lid of the case has two little ribs that sit on both ends of the power switch. This keeps the driver from being turned on while it is in the case. The screwdriver body is about the same size as a straight electric driver like this could be and still be held on to by most people.

As a whole, this looks like a good little device. I love my cordless electric drill and impact driver, but sometimes this will be just as good and less heavy. Expect to use it a lot.

Leave a Reply

Your email address will not be published. Required fields are marked *