It has a diameter of 80mm, which is enough for an 80mm CNC spindle motor to work with it.
The size of the dust outlet is set, so you can connect a 100mm hose to it.
The thickness of the steel plate is about 1mm, but the real thickness includes the paint on the surface of the steel plate.
This brush is 70mm wide, but because it has to be put in a certain way, the width of the exposed part is about 55mm.
The size of the above and the picture are measured by hand, and the error is allowed to be up to 2mm. The actual use doesn’t need to be very precise.
Packages come with.
One 80mm CNC Spindle Motor with a Double Door Brush and Dust Shoe Cover Cleaner is inside.
This is a Product Parameter.
Dust cover for a machine that engrave.
Door type: push-pul.
A white color.
This is how big the circle is: 80mm.
thick steel plate, nylon brus.
The dust shoe is nice. There isn’t enough strength in the clamping because the paint has a very smooth finish. I will add a neoprene liner to the band so it doesn’t fall off when I put it on my arm. You should be careful when you cut the brush to make it fit in both parts. You should also do it in a place that is easy to clean. The bristols are very small, and they go everywhere. It’s just that the clamps are spring-loaded, and they work very well. This is a good way to get rid of dust.
