In order to keep patients safe, the electrical machinery has a double insulation protective device.
The anti-shock type, level, and protection against harmful liquids that could get into the liquid level points are. It is a medical saw that is type II. There are many ways to say B, but this one is the most common.
There is not enough medical electric plaster saw to go around.
The electric gypsum saw moves the saw blade as it cuts gypsum. Even if the saw blade comes into contact with the patient’s skin, it won’t cut them.
The orthopedic products for a fixed reset can be used to remove the plaster bandages that were used.
One set of plaster saws is about the same size as one set.
There are a lot of important technical data here.
There is a voltage: AC 110V/60H.
Input power is 125VA.
Frequency: more than 12500r/min when there is no loa.
When not in use, the non-load speed is 75d.
Insulation Class: E Clas.
Attention and Application.
Before using the saw, check to see if the saw blade is in good shape, missing teeth, and how it is attached to the machine. When installing the saw blade, make sure the blade shaft is in the same position as the pull head axis. With the other nuts in front of the saw blade wrench removed, exit the concave sleeve and saw blade, saw blade, and then tighten the other. Check the motor ventilation path, which should be kept clear to avoid foreign objects clogging it and making the machine run slower.
It should be used with very little pressure. When the blade gets stuck in a plaster bandage, it should be cut off the power slowly. It should not be opened when the power is off, because that would be very dangerous for the motor.
It should also be safe for you to use your motor if the temperature of its housing rises over time, like if it gets too hot. You should either stop using it or wait until it cools down.
If there is an unusual sound or vibration that is too big, you should get it fixed right away so that it doesn’t get worse.
It should be cleaned after each use and stored in dry places with less than 80% humidity and non-corrosive gas. This will keep the plaster saw from getting wet and causing accidents.
Package comes with.
An electric plaster saw that is safe for medical us.
There are two circular saw blades.
It comes with 1 fan-shaped saw blade.
One Wrenc.
One Carry Bo.
There is only one manual here.
The item came on time and as described. Variable speed and a lot quieter than the saw I used to cut wood before. A lot of heat hasn’t been made so far, but I will see how it works as I use it more. To get rid of fiberglass casts below the knee and elbow, I’ve used this tool twice already and it worked both times. Until now, I haven’t had the chance to use it to make a plaster of Paris cast.
