Having the maximum torque of 600 ft-lb helps to break free fasteners.
7300 RPM for high-power fastening and 1000 bpm for low-power fastenin.
Twin hammer mechanism and a power regulator that can be change.
The exhaust pipe on the bottom of the handle is.
Because it has a maximum torque of 600 ft-lbs, it can break free stubborn or stuck screws with ease. High-power fastening can be done with the help of the 7300 RPM and two hammers. This impact wrench also has a power regulator that can be changed. This impact wrench has a composite body, an ergonomic handle, and a vent on the bottom of the handle. It blows 1000 bpm (blows per minute) and has a 1/4-inch air port.
There is a hole in the handle where the big nut goes. A hole in the adapter doesn’t let air out.
A lot of strength. I think there is too much difference between the two forward positions to be able to play them both.
