Speed can be changed. Speed can be changed from 0 to 2300 RPM by how much force you put on the trigger. The variable-speed trigger switch gives you more speed when you push the trigger harder, and less speed when you push the trigger less.
It has a high level of efficienc. An impact driver with a lot of power could have 180N.m of torque and a frequency of 0-3100t/min. It can be used in many different ways to meet the needs of family or work.
To make the battery last longer, there is an LED battery indicator on the 20V 2.0Ah li-ion battery. One hour of quick charging could cut down on the time it takes to do work.
EASY TO USE: The impact driver has an LED work light that lights up when the trigger is pressed. This adds more light to the surface of the work piece so that it can be used in places with less light.
People say: QUICKLY RELEASE CHUCK. 1/fourth “(6.35 mm) hex accessories can be quickly replaced by pulling them out and putting them back in without having to use tools.
A guarantee that comes after you buy something.
A two-year warranty!. We have to take care of the things we sell. As long as you have any questions, you can get in touch with us at any time.
It’s made by MXTOVEL.
The model number is MT-ISD20Li.
Batteries are the source of power.
In this case, the voltage is 20 Volts.
The type of drill is a cordless drill.
This is the speed type: variable spee.
Speed: 0-2300rpm with no loa.
Impact speed: 0-3100t/mi.
180Nm of torque is the max.
LED lights: Is that true.
No, the LED battery capacity indicator says.
It comes with the batteries.
Yes, batteries are needed.
In this case, the type of battery cell is lithium ion.
When you buy a tool like this, there are two real tests.
To start with, how well does it drive a hard thing, like a medium or large lag bolt.
Second, will it take off the lug nuts that have been professionally installed and put them back on as tight as they were before.
On the first job, the MXTOVEL 20V Cordless Impact Driver was able to do the job, but only by a little. I had to do a job where I had to put in 2.5 “Lag bolts that are long and 1/4 inch wide are put in a ceiling joist. This is how it looks. Black and Decker’s 20v cordless drill didn’t have enough power to drive the lag bolts in, so I had to drill new holes. The MXTOVEL 20V Cordless Impact Driver was able to do the job, even though this was close to the limit of its power.
There were no good tools for getting rid of lung nuts with the MXTOVEL 20V Cordless Impact Driver, which is why I was sorry to say that. With a lug wrench, the Impact driver was able to quickly remove them once they were loose. This helped get them back on. To get them fully tight, I only need 1/16th of a turn of the lug wrench.
Yes, I like that it comes with drivers for all three types of sockets.
That means that it’s a lot better at driving than a cordless drill that can only be used for light work. But, to be sure, this MXTOVEL 20V Cordless Impact Driver is only good for light home screw and lab bolt driving, not heavy duty work like that.
