Clamping width quick adjustment button: Press the button to quickly change the clamping width, making it easier to use.
A fixed arm that can be moved to fit different angle grinders.
A thick protective cover and a big design can keep iron chips and wood chips from flying.
Clamping angle can reach 45 degrees, and the clamp can hold 80mm long.
Non-slip silicone is used to keep the shaft in place.
In this paragraph, we’re going to talk abou.
Makes use of high-quality materials, can be used for a wide range of things, and lasts a long time.
A few of the features: You can upgrade and widen the clamping distance. The maximum clamping distance is 150mm. A sliding blade, a smooth slide rail, a smooth slide, and a wider cutting range. This is what sliding cutting is all about.
Clamping angle can reach 45 degrees, and the clamp can hold 80mm long.
It’s safer to use a saw if you move the handle out of the way of the blade’s cutting area. A thick protective cover and a big design can keep iron chips and wood chips from flying.
It’s a hard spring with fine elasticity, a long life, a lot of elastic force to return quickly, and no deformation when it’s stretched.
Clamping width quick adjustment button: Press the button to quickly change the clamping width, making it easier to use.
Non-slip silicone is used to keep the shaft in place. A fixed arm that can be moved to fit different angle grinders.
An adjustable knob for adjusting and a locking fixture for more stable cutting. This will help you get a better cut every time.
Specifications.
This is made of ABS and metal.
It’s a color: green+blac.
The maximum clamping distance is 5.9in / 150mm.
80mm / 3.1in is the maximum cutting distance you can go.
Ideal for angle grinders with 100/125 volts.
The item is 13.4 * 12.2 * 9.8 inches long.
In this case, the package is 15.0 * 10.6 * 4.7in.
4050g / 8.9lb – the weight of the packag.
The package list.
1 * Angle Grinder Stan. The media couldn’t be loaded because it was too big to move.
It is more durable than I thought, and I think this will help me with my smaller projects. As soon as you figure out how to use the lever and slide, you can easily remove the grinder.
This one looks like it’s more stable than the other ones I looked at on this site.
It takes a 10mm wrench to get the nuts that go under the base, a 17mm wrench to hold the angle grinder, and a 14mm wrench for the smaller nuts. These tools are not all you’ll need. You can also use your own 4, 5, and 6mm allen wrenches.
To help you figure out where the parts go after you’ve put them together and you’re done with it, I made a short video. Most of it has already been put together for you.
Hope some of you find it useful. In the next few days, I can’t wait to put my blade back on it so that I can cut some 3 inch PVC to make power tool stands.
