Cooling, lubricating, and blowing away metal chips and gas processing chips are all done at the same time. This makes it easier to work.
Great Value – Save 60% to 80% of lubricants compared to the oldest tube.
Easy Operation: The engraving machine sprays coolant, has a unique design, and rotates in a specific direction.
• Standard fixing device, fine spray port, long lif. An engraving machine that cools down stones/metals/ceramic tiles.
Great for CNC Lathe Milling Drill Machine. Lathe, milling, grinding, drilling, boring, and tapping are usually done with this tool.
Features.
Mist coolant spray.
Air flow and spray mist volume can be changed, making it easier to use.
Save 60% to 80% of lubricants compared to the oldest lubrication tube.
Set up a tool that can cool, lubricate, and blow away metal chips all at the same time.
Installed on a CNC lathe or milling machine to improve the machine’s ability, cutting speed, and tool life, as well as save time and money.
This is how much it weighs: 178 grams / 6.28.
It’s made of plastic and metal.
Long: 375mm or 14.76i.
Length: 49.21in.
Size of the air pipe interface: 8mm / 0.31i.
Package: 170 G / 6.00 Ounce.
To put it another way, the package is 180*140*50 MM / 7.09*5.51*1.97 Inches.
Packages come with.
1 x Mist Coolant Spraye.
Valve doesn’t do anything. Can’t change the air flow. Air leaks out of the line in a bad way.
They sent me a new one. There are still a lot of problems with it, so I made it better. An elbow was used instead of a valve. I added a fish tank pump and check valve, as well as a metering valve in the fluid line, a regulator and air solenoid in the air line. Control is better now. The fluid doesn’t go back to the tank, and start up is very quick and easy now. With these changes, it is by far the best mist coolant unit I own. I’m going to change my rating because the seller was really concerned and tried to help.
