The material is called material. People who work with Tungsten Carbide are called “Tungs. Rotary burrs are made of tungsten carbide that is hard and strong.
It’s about 60mm long. 6MM 1/4 Inch shaft; outside diameter of the tip – 10m. The tip of the blade is 10mm to 25mm long. Size: (60MM) Ball Shape Lengt. The 6MM 1/4 Inch Electric Die Grinder can fit.
Cutting Bur Type and Shap. Double-cut: oval, cylindrical, tree, 14-degree taper, ball, and a bal.
These rotary burrs have a hardness of more than HRC70. They could be used to make all kinds of hard metal and non-metal things. They could also be used to make things that were very hard (such as marble, jade bone.
Uses: This set of carbide rotary burrs can be used to cut and grind metal and non-metal. It can be used to cut and grind metal and non-metal like cast iron and cast steel. It can also be used to grind ceramic tile, marble and jade.
Can process a wide range of metal and non-metal, with a hardness of up to HRC70.
They are safe and easy to use, and they can cut down on the amount of work and improve the working environment.
A lot of the time, tungsten grinder bits can be used instead of a small wheel, and there is no dust.
Production efficiency: It is several times faster than files and almost ten times faster than small wheel stalks to process.
Specification.
Solid Tungsten Carbide is the material.
It has an oval shape. It’s cylindrical. It has a 14-degree taper, and it’s round.
A type of cutting bur is called a “double cut solid..
Hardness can go up to HRC70, which means it can be very hard.
About 60 mm.
The head is 10mm.
Size: 6 mm, or 1/4 inch.
It’s usually used with pneumatic or electric tools, and the speed is usually between 6000 and 50000 revs per minute. Clip positively while you’re cutting; milling cutting mode is better than reciprocating cutting.
A package comes with.
FIVE Pc. It’s bad to use 10x6mm Tungsten Carbide Rotary Burrs because they’re bad. When I used it for the first time, the shank broke off and the tip flew off in less than a day.
