A 10-inch Wet Tile Saw, a Wet Tile Saw Stand, a 10-inch XP4 Porcelain/Tile Blade, a Submersible Pump, a Water Pan and two water trays.
The tool is 36″ long, 29″ wide, and 24″ high. 69 pounds. In this case, the voltage is 120 V. At its peak, this is 1.5 H.
Other things to know. In this case, the Arbor Size is 5/8″. In this case, the blade diameter is 10 inches. It can make diagonal cuts up to 18″ x 18. A 3 1/8″ cut is the maximum depth that can be made. When you use a plunger, the machine can cut 28 inches. Bevel Capability – 45.
A cutline indicator and stainless steel rollers keep the cutting steady and accurate to within 1/32 inches over 18 inch cuts, which is very close.
A small saw frame makes it easy to move and store in a car.
The 69-pound D24000S 10″ Wet Tile Saw can be set up and moved by one person. Stainless steel rails are built into the frame of the tile saw to make sure that the cuts are straight. Rear and side water attachments can be used on a tile saw to catch water that is sprayed from large tiles. This helps keep the water in the pan. 10″ Wet Tile Saw: The D24000S comes with a 10″ Wet Tile Saw with a stand that folds for easy transportation and storage. The 69-pound Wet Tile Saw is held up by the stand. It also gives you a good place to work. It’s made of durable aluminum framing and stainless steel rails that can withstand the rough conditions on the job site. Lightweight folding stands are easy to set up on the job and store in the back of the truck when not in use.
At the tile shop, I work as a professional. I’ve been doing it for a long time now, though. Over the last few years, I’ve used a lot of different wet saws. I’ve used the rigid one the most recently. For the rigid, I had very high hopes. Loved how it stood. I had some doubts about this one. But I thought I’d give it a try, and if it didn’t work out, I could always send it back. But this saw is really good.
Take a look at the directions and don’t do what they say. Do not put the water pump in a tray and let it get dirty water. That’s fine. But, put it in a 5 gallon bucket of clean water. When the black tray is full and you don’t have any water. Empty the black tray and fill the bucket with clean water again. In the past, I have never had problems with my water pump, and I never will. Only use clean water to pump.
