This mini straight air die grinder has a lot of power in a small package. It has a free air speed of 65,000 rpm and a working air pressure of 90 psi when used with an air compressor. With its small size and light weight, the pen-shaped design makes it easy to use with one hand.
In this design, it’s made of metal. It’s strong and long-lasting, and it never rusts. This is a great tool for making models. It’s professional and practical. A high-speed rotation will make it easier to work, and it will also make the work easier to do.
Versatile: It can be used for a wide range of metal cleaning, chamfering, grinding, engraving, and internal processing. Also, it can be used to cut, grind, and grind plastic, stone, wood, and so on, too. Widely used in ironwork, carpentry, tire industry surface treatment, shipbuilding industry, and many other industries, such as the tire industry.
Lightweight: This micro die grinder has a pencil-style shaft that makes it easy to cut, grind, and polish surfaces.
The air inlet is 1/4 inch wide.
It takes 90 psi of air on average.
In this case, the disk is about 3 mm wide.
The no-load speed is 65000 rpm.
The recommended diameter of the trachea is about 8 mm. The package came with. There is only one micro grinder in this set. 1 hose, 60 inches long. In this case, there are two chuck wrenches. One coupler and one piece of hardware. There is only 1 manual for this item.
Features.
A high-speed rotation will make it easier to work, and it will also make the work easier to do.
With its small size and light weight, the pen-shaped design makes it easy to use with one hand.
Can be used for a variety of metal cleaning, chamfering, grinding, engraving, and internal processing. Also, it can be used to cut, grind, and grind plastic, stone, wood, and so on, too.
They are made of metal, which makes them strong and durable, as well as wear-resistant and rust-proof. This is a great tool for making models. It’s professional and practical.
Widely used in ironwork, carpentry, tire industry surface treatment, shipbuilding industry, and many other industries, such as the tire industry.
Specifications.
It’s made out of metal.
Color: As the picture show.
1/4 inch air inle.
Every day, 90 PSI of air was used.
In this case, the disk is about 3 mm wide.
The no-load speed is 65000 rpm.
The diameter of the trachea should be about 8 mm.
The package came with.
One Micro Grinder for each of the 1 Pc.
One Pc x 60 Inch Hose.
In this case, there are two Chuck Wrenches.
This is 1 Pc x Couple.
In this case, there is only one Manual.
Note.
1. Because of the light and screen difference, the item’s color may look a little different than in the picture.
2. Please allow a 0.5-2 cm difference in measurement due to manual measurement.
Adsupluty: Nothing else should be done.
