Car Polisher Package: 8pcs 3 “sponge polishing pads, 1pc of woolen buffer pads, 1pc of M10 drill adapter, and 1pc of suction cup are what you need.
All kinds of coat paints can be waxed, polished, and sealed with this product. It can also be used to clean and improve the lightness of the paint. In seconds, you can change the pads because they have adhesive backs.
A good buffing pad is made of wool or foam. Buffing has good strength, wear resistance, and long-term use. Wax, polish, and sealing glaze are all types of coat paints that can be waxed or polished. They can be used to clean and make them lighter.
Woolen polishing pads are very easy to use, and they don’t hurt your hands or skin.
There are two things that help with this: polishing and a drill adapter. In seconds, you can change the pads because they have adhesive backs. There is Velcro on the back of the disk, so it’s easy to change the sponge or woolen buffer quickly.
Sponge Polishing Pads with Advanced Technology: Soft and fine workmanship, won’t damage the surface, and can be washed. They are very light and easy to put together. Every few weeks, you should wax and polish your car to make it more resistant to attacks from the outside.
3 “/80mm 11pcs of thi.
Features.
Extra Fine Black and White (Extra Fine) Polishing Pad. Gives a rich, swirl-free high-gloss finish.
Final cutting, polishing, or glazing clear coat surfaces with the Yellow and Blue Light Cut & Polishing Pad.
ORANGE COARSE FOAM POLISH PADD . The standard cutting pad is good for enamels, acrylics, and urethane.
How to.
1. Make sure the area you’re going to work on is clean. The glass should be clean.
2. Make sure you have two small plastic tubs ready. Quart or pint sized tubs work well. Fill the other half with water.
This is step 3. Dip your polishing wheel into the water and let it get thoroughly wet, but not so wet that it falls apart.
4. Add some Cerium Oxide to the empty tub, and add enough water to make a sludge, like a thick paste.
Afterward, connect the dampened polishing wheel to your drill and dip it into the slurry.
Place the polishing wheel on your work area, use a small felt wheel if the scratch is near the corner of the windows, and keep the wheel moving up and down in a circle.
If the slurry gets dry, your glass could get too hot and crack. If your slurry starts to dry out, you can spritz it with water from a spray bottle.
So useful to have around. It has been a long time since I used them to fix the faded headlight lenses on four different cars. The product you choose for your car should be used at a medium or slow speed with these tools. There are people who make the job go quickly and with great results.
