It’s good for 90% of the most popular brands of 7-inch/180mm angle grinders. 7 inch/180MM double row diamond cup whee.
To make the surface work even with other things, you can remove the edge piece. Allows for dust to be collected when flush edge grinding is done through a door that is flush with the ground.
Soft brushes keep dust from getting out and help the tool move over the surface.
There are locks on the end of the vacuum hose so that it can be attached to the tool. Most vacuum systems will work with a standard hose fitting like this one.
A good choice when you want to finish or remove concrete material, paint or other surface coatings, and remove paint or other material from the surface.
Features.
Hood with clamp fitting and 6pcs clamping washers for the suction.
Locking the attachment to the vacuum hos.
A guard with a brush ring to remove dus.
A piece that can be taken out so you can grind close to the walls.
Allow for the collection of harmful dust when surface grinding is done, so that it doesn’t get into the ai.
.
Specification.
Inches: 180mm/7inc.
Ideal for Bosch, Makita, Dewalt and other brands of power tools.
A package comes with.
1 x Dust cove.
Clamping washers in a pack of 5.
There is one clamping flange in this package.
One Shroud wrench.
User’s manual: .
In this case, you can’t use this shroud with a Dewalt DW840 because it doesn’t fit. There are screws in the collar, and the cup won’t be able to reach the pressure plate.
2) The hose connector on the shroud is in metric, which is different from the US. If you have a standard hose (1-1/4″ or 1-1/2″), it won’t work. Hoses that were 1-1/2″ and 1-1/4″ were both too small.
A well-built thing that I would have liked to use.
