The v-shaped sole provides the ideal angle. The Jucoci-V-shaped Edge’s sole has a perfect 90-degree angle to the ground. As you slide along the board’s edge, you’ll be able to see the razor-thin shave curl away from the plane as you do so. Placed on the corner of your shaft, it will center the reamer exactly on the edge. The thumbwheel for adjusting the depth of cut is positioned comfortably under your thumb and index finger.
Corner planes that can be adjuste. Corner planes from Jucoci-Edge can be adjusted for the most subtle cuts possible, or they can be used to create more dramatic profiles with a few more passes. For each cut you make, you must physically adjust the depth of cut to achieve the desired result. You have complete control over the way the cut will look when it is finished (as opposed to smoothing an edge with a block plane). If your profiles appear heavier at one end of your piece than the other, they will never appear to change their angle in the middle of your piece randomly.
‘Durable and sturdy,’ says the author. Despite the fact that they hold their edge exceptionally well even in tough material, re-sharpening them is as simple as honing the flat side of any honing stone. The Jucoci Edge milling cutters are made of 01 tool steel, which allows for the highest level of sharpness possible. Hardening and precision grinding and polishing are performed on them.
“Ergonomic Design” is a phrase that means “human-centered design. The system for adjusting the blades was created by us. All of this results in tools that are faultless in their operation, comfortable in your hands and built to last for several generations. The bodies have been meticulously anodized to reduce friction and provide a long-lasting wear surface that will not damage your shaft over time. The machined aluminum bodies are lightweight and have a profile that is reminiscent of antique molded parts and fold levels. They are also comfortable to hold.
‘Easy to Use,’ says the author. Its advantages include being small and portable, being simple to use, and being simple to disassemble and reassemble. It’s as simple as removing the next Jucoci Edge to completely transform the appearance of your piece.
Using saws and planes with sharp, clean edges will ensure that your carpentry comes together in a professional manner. These sharp edges, on the other hand, will have an impact on the appearance of your finished part. Aside from that, they are prone to damage and can be sharp enough to cause injury. As a result, skilled furniture and cabinetmakers soften the exposed edges of their work with a bevel or a radius to make it more appealing to the eye. It is now possible to quickly relieve edges without changing the bits in your router or connecting anything that has either a 1/8 “, 3/16 “, or 1/4 “radius or a 45 ° bevel thanks to the latest edge corner planes from Jucoci.
Despite the fact that I haven’t tried them yet and probably won’t for some time, they were a good deal. Given that I do not intend to use them on a ‘professional’ level, there isn’t anything I expect from them. However, it was a less expensive alternative to purchasing a chamfer plane as a kit, which would have included these additional shaped blades. I just wanted to make sure I had the alternate shapes on hand in case I needed them.
