– 1/20″x1.26″ (1.2x32mm) + 1/17″x1.26″ (1.5x32mm) + 1/13″x1.26″ (1.3x32mm) – 3 PCS ALL IN ONE PACK – 1/20″x1.26″ (1.2x32mm) + 1/17″x1.26″ (1.5x32mm) (2.0x32mm).
100% PURE COPPER MATERIAL- Made of pure copper, these nozzles have been tested hundreds of times and continue to function as if they were brand new. Copper nozzles have the potential to last even longer than aluminum nozzles.
POSSIBLE SPECIFICATIONS- Three different sizes are available; each nozzle has a different size bore, so you can choose the one that is most appropriate for you and meets your requirements.
ANTI-DRIP DESIGN- All copper nozzles are equipped with an anti-dripping pressure valve, which ensures that no glue will drip from the nozzle during the preheating process, during use, or after use.
Highly compatible with more than 98 percent of glue guns on the market; nozzle thread is the most common size, measuring 7/16 inch in diameter.
Size: 1.2x32mm(1/20″x1.26″) (1/20″x1.26″. 1.5x32mm(1/17″x1.26″. 2.0x32mm(1/13″x1.26″.
M11 (7/16 inches) is the thread diameter. 10.6-10.8m.
Copper is the material used for the nozzle.
List of items to bring.
Copper Glue Gun Nozzles (Set of 3.
3 x Non-slip Gaskets are included.
1 x Small Wrench (optional.
Method of Installation: Installation is done in two stages.
1. For glue guns that have never been used before, simply replace the old nozzle with a new one to get things started.
2. For glue guns that have been previously used, plug in the power and allow it to preheat for approximately one minute before removing the old nozzle with a spanner (DO NOT USE YOUR HANDS AS THEY ARE VERY HOT) and replacing it with the new one.
These tips are compatible with my Arrow glue gun. You can use the tip to grind for any specialized project and have a good time doing it.
