COATING & CLEANING: Scrub the surface of the product and hard-to-reach corners to remove burrs, rust, dust, and oxide layer. Particularly applicable to items made of brass, copper, stainless steel, gold, bronze, and silver.
COATING: Improving the quality of products by removing residue, deburring, grinding, and polishing them is the goal of coating.
Micro-electronic equipment, jewelry, and impression production are some of the applications for this material. A great accessory for locksmiths, gunsmithing professionals, jewelers and technicians, coin collectors and archeologists, as well as for university students.
COMMON APPLICATION: Attach a 1/8″ Collet to your hand drill, drill press, Dremel, and foredom tool to complete your project.
Steel Britle is a hard material that is excellent for sanding steel and aluminum surfaces. It is also excellent for sanding metal surfaces.
REAMTOP Steel Wire Wheel Brushes Set Kit Rotary Tools for Dremel (REAMTOP Steel Wire Wheel Brushes Set Kit Rotary Tools for Dremel.
Instruction.
It is preferable to fully enter and then slightly back out an accessory bit into a tool before tightening it to achieve the best results possible. This provides enough shank for the collect or chuck to hold on to the bit without losing its grip. Maintain a light touch, allowing the tips of the brush to do the majority of the work. Excessive pressure can cause the bristles to break.
Allow the tool with the brush to run at its operating speed for at least one minute before using it on the material to ensure that any loose bristles are discharged. Take care to ensure that no one is in front of or in line with the toothbrush.
The bristle brush can be used with polishing compound to achieve a smooth finish.
It is not recommended to exceed 15,000 rpm. As a result, unless you are using a Speed Control, do not use a Single-Speed MultiPro Rotary Tool or a Heavy-Duty Flex-Shaft Tool with this product.
Always read and follow all safety instructions that come with your rotary tool, and always wear eye protection when working with rotary tools.
Specifications.
Steel is the primary material.
Silver is the predominant color.
Application: suitable for metal surface polishing, rust removal, and other applications.
Shank Diameter: Approximately 1/8″ (3mm) in diamete.
The length of the shank is approximately 2 inches/50mm.
Wire brush diameters are approximately 3/16″, 9/16″, and 1 inch (5mm, 15mm, and 25mm).
Included in the package are.
Wire wheel brush with a 15 x 25mm diamete.
Wire wheel brush with 15 x 15mm wire.
Wire wheel brush with 15 x 5mm wire.
It takes approximately 30 seconds before the bristles/wire on the large wheel begin to fall off. Your arms, legs, and clothing will be impaled by these thugs. DO NOT USE INDOORS; instead, wear large safety glasses and, if possible, a protective face shield. Despite the fact that they provide, they are not worth it due to the frequency with which they must be changed. Having said that, after using approximately 5 of these, I was able to clean two seal seats.
