Set up an efficient, high-flow compressor system by shopping our selection of compressed air piping kits. Items included with kits range from deburring and cutting tools to complete sets with fittings, mounting clips, unions, elbows, and more. Choose from high-quality aluminum FastPipe kits, nylon tubing kits, and Maxline piping kits.
air compressor line kit Related Question:
Can you use PEX for air compressor lines?
Q: Can I use PEX pipe for compressed air applications? A: No, PEX pipe is not intended for compressed air applications.
What pipe is best for compressed air?
A great choice for compressed air piping is stainless steel because it is strong and resists corrosion. Like with copper, corrosion resistance in stainless steel piping produces a cleaner, more consistent stream of air.
Is PVC good for air compressor lines?
PVC Pipe. The use of PVC pipe is common but not recommended for use with compressed air. The presence of air compressor oils in the line and heat from the compressed air accelerates the degradation of PVC. These failures, combined with air under pressure, are potentially fatal due to the airborne, razor-sharp shrapnel.
Can I use SharkBite for compressed air?
SharkBite, part of RWC’s family of brands, now offers a new range of brass push-fit fittings and anodised aluminium pipe to simplify small to large commercial and industrial compressed air installations.
Can I use ABS pipe for air compressor lines?
ABS, PE and HDPE plastics are appropriate for use in compressed air piping systems and have some benefits over metal. The materials are lightweight and easy to work with, requiring no special bracing or supports. Plastics can be easily cut and fit using standard tools and can be glued together rather than welded.
What size pipe do I need for compressed air lines?
A shear will require anywhere from 8 to 16 cfm at 90 psi through a half-inch pipe. If the pipe exceeds 100 feet in length, you will need a 3/4-inch pipe to accommodate the pressure and velocity of applications that exceed 15 cfm.
Does reducing pipe size increase air pressure?
Because if the diameter of a pipe decreased, then the pressure in the pipeline will increase. As per Bernoulli’s theorem, pressure can be reduced when the area of conveyance is reduced. In the narrower pipe, the velocity can be high, and pressure can be higher.
How far can you run an air compressor line?
Typically, air hoses will be either 50- or 100-feet long, with a few exceptions. Most people will go for the 100-foot option because it allows them to maximize their distance from the air compressor.
How much psi can PVC take?
Most smaller sizes of PVC pipe are rated for between 300-600 psi, but that is only if the pipes are new and the system is perfectly sealed. As we mentioned before, it is extremely difficult to make a PVC system airtight. Also, due to the fact that it is plastic, PVC pipe becomes brittle with age.
What can I use for air line in shop?
Use copper instead. It’s available at most hardware stores and home centers. Solder it using the same fittings as you would for water supply lines. If you don’t want to solder, use galvanized or black steel pipe.
Can type M copper pipe be used for compressed air?
Copper pipe is a common selection for sensitive compressed air systems and when correctly sized and connected is very durable and effective. Type M hard, type L hard and type K soft copper has a working pressure of 250 psig (17 bar).
How much psi can PEX?
PEX-a pipe can withstand a burst pressure of around 800 psi (almost two times the requirement for ASTM F876, the standard specification for PEX tubing). So neither the pipe nor the fittings are weak points, making for an extremely high-performing system in domestic water and hydronic piping applications.
Can CPVC pipe be used for compressed air?
No, PVC and CPVC pipe should not be used for compressed air lines. Here is what the manufacture has to say about it. WARNING! The use of plastic piping with compressed air or gasses can result in severe bodily injury or death.
What is copper tubing used for?
Copper tubing is most often used for heating systems and as a refrigerant line in HVAC systems. Copper tubing is slowly being replaced by PEX tubing in hot and cold water applications. There are two basic types of copper tubing, soft copper and rigid copper.
How much psi can abs take?
Acrylonitrile – Butadiene – Styrene (ABS) is a rigid pressure piping system renowned for its high impact strength and durability which combine to give exceptional toughness. It is suitable for use over a wide temperature range from -40ºC to 80ºC at pressures up to 15 bar.
