500 ft-lbs of maximum torque; 700 ft-lbs of torque to loose.
Twin Hammer Mechanism: This is a no-nonsense, hard-hitting 3/8-inch impact wrench with a lot of power.
You can keep the noise level down to 86 dBA with a tuned exhaust system.
For the user’s ultimate comfort, the impact wrench has a handle that is designed to be easy to grip.
AirCat Line: The most important improvements in pneumatic power tools have been made by the AirCat Line.
An overview of what this item is abou.
Make sure your toolbox is up-to-date now. The AIRCAT Nitrocat 1355-XL is a no-nonsense, hard-hitting 3/8-inch impact wrench that has a twin hammer mechanism built in, making it very powerful. The 1355-XL has 700 foot-pounds of loosening torque and 1,750 blows per minute, which is the best in the business. You’ll be able to get the job done quickly. During this process, two hammers in a closed cage move around the anvil. In this way, the hammer can hit both sides of the anvil at once. A twin hammer design is very long-lasting and good for jobs that run for a long time.
This power tool has 500 foot-pounds of maximum torque and 700 foot-pounds of torque to loosen things. There are two hammers in the Nitrocat 1355-XL 3/8-inch impact wrench, which makes it more powerful. All the power and speed you need are there. In this case, the tool isn’t very noisy because it has a quiet tuned exhaust. It has a patented, easy-to-use flip lever switch for forward and backward, as well as a durable, Kevlar-reinforced “body armor” housing. Use it to work on things like the brake calipers and the transmission.
AIRCAT makes top-of-the-line power tools that are great for any handyman or construction worker. The AIRCAT line is the most important development in pneumatic power tools in more than 30 years. Our company was started in 1998, and our tool line has a lot less noise while still having a lot more power and torque. AIRCAT also has a patented ergonomically engineered handle design that helps the operator’s hands, wrists, and arms be less stressed and tired. Most AIRCAT tools have the patented tuned exhaust muffler technology, which allows air to pass through without causing back pressure. This allows more power to be kept and significantly reduces noise.
There is a Manufacturer.
All the power, no noise. The AIRCAT tool line has a lot less noise, but it still has a lot of power and torque. If our tools are used correctly, they should not make any noise at all. This is far below the OSHA guidelines. This feature is good for both the mechanic and the business as a whole. Patented muffler technology in all of the tools lets air flow freely without causing back pressure, allowing more power to be kept while making less noise. AIRCAT has come up with a new through-the-handle exhaust design that includes its revolutionary, world-wide patented internal muffler and filter. The benefits include fewer hazards from breathing air that has been used, no blow-by into the operator’s eyes and lungs, and less noise. A patented ergonomically designed handle also helps to relieve stress and fatigue on the hands, wrists, and arms of the people who use it. The patented AIRCAT handle distributes the weight more evenly for a balanced tool, and it has a unique grip that makes it easier to use for a long time. A full line of pneumatic tools is available from AIRCAT. These include impact wrenches, air ratchet wrenches, air drills, die grinders, and cut-off saws. When the company was started in 1998 in Spokane, Washington, it was called the Spokane, Washingto. It is a line of high-quality pneumatic hand tools that use unique and many-patented exhaust muffler and filter technology. The AIRCAT tool line has a lot less noise, but it still has a lot of power and torque. When you buy an AIRCAT impact wrench, you can choose between a hammer and a clutch.
For the past 13 years, I’ve been a diesel engine mechanic. I’ve used Snap-on impact tools, both 1/2 and 3/8, for most of that time. Snap-on impacts have never been very powerful or durable for me. My MG325 was getting weaker and the cost of fixing it was $150, so I took a chance on the NirtoCat 1355-xl. It worked out well for me. As soon as it breaks, I’ll just buy a new one. It does everything my old Snap-on did, is quieter, and costs less than half as much. I also replaced my 1/2″ Snap-on impact with a NitroCat. It’s more powerful than my old one, and it turns midrange head bolts that my Snap-on couldn’t turn. Because MAC tools sells a lot of the same things, they just change the name and price.
