Power and performance: maximum torque of 1,800 ft-lbs; loosening torque of 2,000 ft-lbs.
D Handle Grip: By rotating the hammer case, the grip can be found on either the right or left side; the inner cavity has been enlarged.
Ni-Cr-Mo Alloy Steel: The mechanism parts and anvil have been triple heat treated for maximum reliability.
Impact Wrench: Ergonomic handle for the ultimate in comfort for the operato.
AirCat Line: The most significant advancements in the performance of pneumatic power tools have been made in the AirCat line.
It’s past time to update your toolbox of tricks. For prolonged use, the AIRCAT 1992 1-inch impact wrench with an 8-inch extended anvil provides the ultimate in user comfort and convenience. You can get a maximum torque of 2,100 foot-pounds out of this impact wrench. It is lightweight, weighing only 16.7 lbs, and has an unrivaled power-to-weight ratio. The 8-inch anvil gives you a little more reach.
This power tool can generate a maximum torque of 1,800 foot-pounds and a loosening torque of 2,000 foot-pounds with ease. Its low-maintenance pinless design ensures maximum reliability while also providing increased hitting power. It has an enlarged inner cavity for the rotating “D” handle grip, which allows it to rotate freely. It is equipped with a combined forward/reverse switch as well as power management features. The hammer mechanism parts and anvil are made of triple-heated Ni-Cr-Mo alloy steel, which is extremely durable. It also has a through-hole and friction ring socket retainer that works together.
AIRCAT manufactures high-quality power tools that are ideal for any home handyman or construction professional. The AIRCAT line of pneumatic power tools represents the most significant advancements in the performance of pneumatic power tools in more than 30 years, according to the manufacturer. Our tool line, which was established in 1998, has a significantly reduced level of noise while maintaining greater power and torque. Aircat also includes an ergonomically engineered handle design that has been patented to relieve stress and fatigue on the operator’s hands, wrists, and arms during operation. In most of its tools, AIRCAT incorporates its patented tuned exhaust muffler technology, which allows discharged air to pass through without developing back pressure, allowing the tool to retain more power while significantly reducing noise.
As a result, I didn’t have a large tank of air from a 220V compressor to work with, but it was still effective at hammering 1-7/8″ nuts off the transverse suspension beams. It’s difficult to tell when they were last removed, but the truck is 32 years old.
Then I used it for the two-piece Budd lugs on the same semi, which I compressed with a 21-gallon high-pressure air compressor. Once again, it completed the task, albeit slowly.
It’s exactly what you’d expect.
My air line is 1/2″ in diameter on the inside and has high flow fittings. If my recollection serves me correctly, they are 3/8″ because that is the size of the hose that was used. Forget about the 1/4″ stuff, and if you have the ability to run 1″ hose, go for it.
And, if you really want to put this gun to work, invest in a powerful two-stage 220V air compressor.
