The 1/2 receiver makes it easy to use any 1/2 bit tip or hex nut driver.
For loosing or removing screws and bolts that are very tight or rusted, this is the tool for you.
It’s important to have if you work on a motorcycle or on an engine.
This package comes with one impact screwdriver.
It comes with one Impact Screwdriver Adapter per package.
It comes with two “+” drill bits and two “-” drill bits. It also comes with one Screw Extractor #3 and one Screw Extractor #2.
It comes with 1 piece of Screw Extractor #4.
This package comes with bits made of S2 High Alloy Steel impact grade. They have precision-milled tips to make sure they’ll fit. The impact driver has a finish that is resistant to corrosion and a knurled grip that doesn’t slip.
Use a 5/16″ drill bit to remove screws from 7/32″ to 9/16..
Number 4 removes screws from 9/32″ to 3/8″ and 1/8″ pipe (use a 1/4″ drill bit for this).
3 stars: The buyer has offered to give me my money back, so I’m changing my rating from 2 stars to 3. I didn’t accept the money because I didn’t want to.
I bought this to get two bolts out of a mosin nagant that were stuck in it. At first, the bolt was loose. When the tool is in the “L” or counterclockwise position and it gets stuck, it moves to the “R” or clockwise position. Inadvertently, I was tightening the bolt. I didn’t notice until about 10 whacks later when the 8mm slotted bit broke. Fortunately, there was an extra 8mm bit that I used to remove the screw about 360 degrees.
Before the bolt could be removed, I turned the tool back to “L” after each whack, but the second 8mm bit broke before the bolt was loose enough.
I now have to search the internet for replacement parts, which means that my project has to be put on hold until I can find them.
