Around 3/4 of the length of the whole thing (L).
Drills can go from 1/4 to 3/8 of an inch.
manufacturers, fabricators and cabinetmakers will find what they’re looking for here.
U.S.A.’s headquarters and warehouse are in new York.
Commitment to providing the best quality and new products on a consistent basis.
3mm to 10mm-drills can be clamped to the tool. A new and universal way to solve the problem of drilling holes to the right depth. Special design to make sure there are no marks on the surface that is being drilled. It’s easy to use . It’s very simple to put together and to change the drill-depth. No. 20212 is a drill that can go from 1/4 to 3/8 inches in length. It has a range of 6mm to 10mm. In this case, the universal drill depth stop is used.
Pricey, but this thing works very well. To get depth stops for odd-sized bits, this is the way to go. One thing I didn’t like was that it didn’t come with a socket for me to adjust it.
If that was an accident, I can’t be sure.
When you use it, you want to make sure both screws are set the same way so the gap is about the same. This is the best fit for you.
Honestly, most people don’t need this. Most drill bit and driver sets come with several depth stops, and even if they’re too big for the drill bit, that’s usually not a big deal.
This is nice to have if you need the precision, a very tight fit, and it to be right on the bit.
It’s a little over an inch wide. Heavy duty.
