1/4 inch air angle die grinder kit for use with an air compressor, suitable for precision machining, smoothing, chamfering, deburring, grinding, polishing, and engraving. The kit includes everything you need to get started.
Design that is both compact and lightweight for easy maneuverabilit. throttle should be locked off to prevent accidental startu. The 90-degree angle of the head allows for greater maneuverability in confined spaces.
An angle die grinder is powered by a 0.32 horsepower motor that can spin at a maximum speed of 20,000 revolutions per minute. The pneumatic angle die grinder has a built-in speed regulator, which allows for greater control over the speed.
The 90-degree head provides versatility in a variety of applications, such as grinding in tight spaces or at an angle. The ability to work in tight or confined spaces with an angled head gives you greater flexibility.
1/4 inch air angle die grinder kit with three pieces (two of each size) “Roll lock sanding discs, 10 pcs shank grinding stones, and 4 collets are available to meet a variety of requirements.
The following are the specifics of the 1/4 inch air angle die grinder kit.
Stepless speed control knob switch: Select different speeds to meet different needs based on the purpose of the switch.
Air inlet and exhaust ports: air inlet filter design, which effectively filters air impurities; humanized annular exhaust design, which is more environmentally friendly; air inlet filter design, which effectively filters air impurities.
1/4 inch thick industrial grade stainless steel “the chuck has high concentricity, small yaw, low vibration, high wear resistance, produces no heat, and operates in a stable manner.
Plate-type start-stop switch: This is a safe pressure plate type start-stop switch that is more reliable and more consistent in its performance and reliability.
a quarter of a ” (6.35mm. High-precision collet: high-temperature carburization, which allows it to withstand greater impact strength, precision CNC lathe processing, and is less prone to deformation.
The following components were included in the 1/4 inch air angle die grinder kit.
1 pc. 1/4 inch angle air die grinder with a slanting blade.
50mm/2 inches) round brown corundum grinder discs, 80 grit round brown corundum grinder disc.
500-grit non-woven scouring pad grinder discs (50mm/2 inches) 1 pc 400-grit scouring pad grinder disc.
100 page Zirconium corundum turn-lock grinder discs (50mm/2 inches) with 80 grit Zirconium corundum turn-lock (included).
5 pieces of grinding stones with a 3mm shank.
5 pieces of grinding stones with a 6mm shank.
2 pcs. of hex wrenc.
1 set of 2-inch quick-change discs with a 1/4-inch (6.35mm) holder each.
3 pcs backup collet size 1/8 in a plastic bag “(3.18mm), as well as 3mm and 6m.
A single American standard air connector (as pictured).
The following are the specifications for the 1/4 inch air angle die grinder kit.
Collet size is 1/4 inch “Installed at a depth of 6.35mm.
No-load speed: 20000 revolutions per minut.
Air consumption is 2.8 cubic feet per minute (80 liters per minute).
90 pounds per square inch of pressur.
Power: 0.6 horsepowe.
Specifications for the air inlet: Air Inlet: 1/4”.
The main product weighs 0.49 kilograms.
