Large diameter high power motor for superior performance. Fully leaded stator windings for increased motor durability. Power Output 1,000W.Newly-designed housing and powerful motor.
angle grinder 240 volts Related Question:
What voltage is an angle grinder?
Like other mains-operated power tools, corded angle grinders are available with a voltage of either 240 volts or 110 volts. The voltage of an angle grinder indicates where it is safest to use it: in a domestic environment or out on a work site.
How many amps should my angle grinder be?
Five or six amps is common on mid-range angle grinders, but some are as high as 11 amps. Larger models can reach 14 amps, which is a practical limit since standard electrical outlets only provide a 15-amp maximum supply. Some heavy-duty angle grinders use horsepower instead.
Does the wattage of an angle grinder matter?
Disc diameter – angle grinders with larger diameters take bigger discs that make deeper cuts. Wattage – higher wattage gives more power to cut through denser materials. Speed – multiple speeds give more control for precise work.
Does rpm matter for angle grinder?
The speed, the surface feet per minute, that will be best for productivity, finish, and consumable life might not be the maximum RPM of a single-speed grinder. For run-of-the-mill applications, the maximum recommended RPM for most angle grinders will—and should be used to—do the job.
How would you know if the cutting disc is for metal?
Choosing Thickness of Cutting Wheels that needs to be cut. For standard everyday jobs on either stainless or mild steel using an angle grinder, choose a 1mm or 1.6mm thickness in your disc. For projects that involve thin metal such as sheet metal, choose a 1.0mm or 0.8mm thinner cutting disc.
How deep does a 125mm angle grinder cut?
All in all, 125mm angle grinders are extremely versatile tools despite their limited cutting depth of just 38 mm. While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
How much electricity does a grinder consume?
The rated power of a mixer grinder is approximately 500 watt. If you use your mixer grinder for 1 hour daily it will consume 0.5 kWh of electricity in a day and 15 kWh of electricity in the entire month.
How many amps does a 9 inch grinder use?
This powerful ingredient grinder provides quick stock removal and efficient shaping, grinding and cutting of metal. The 9 in. angle grinder has a rugged 15 Amp motor that delivers 0-11, 500 RPM and features a rugged aluminum gear case to withstand rigorous use in the shop Or garage.
How many amps does a Dewalt grinder use?
Angle Grinder.
What is a right angle grinder?
A right angle grinder is one of the most versatile tools you can own. They are small, easy to control and can work into tight spaces. They can take the place of a variety of limited tools. With a grinder, you can cut metal, stone or ceramic tile and you can use it to strip coatings from wood and metal as well.
How much power does a bench grinder need?
Typically wattage range from 250 to over 370 watts – the higher the wattage, the more powerful the grinder will be. When looking to purchase a bench grinder, look for: The tool rests – they need to be firmly mounted and adjustable.
How much rpm is good for a grinder?
For a domestic mixer grinder, anything from 18000 to 23000 RPM is good enough. A juicer mixer grinder will ideally require low to medium RPM for working efficiently. At a higher RPM, liquids or spices may not be blended or grinded effectively.
What is a good rpm for angle grinder?
Smaller angle grinders generally have maximum rotations in the 5,000- to 11,000-rpm range, and many have variable speed controls so you can tailor the speed to your needs. Larger angle grinders usually have lower maximum speeds, often in the 5,000- to 8,000-rpm range.
What is good rpm for a grinder?
The speed should be between 850 and 1,600 RPM. If you are cutting stainless steel and tool steel, with a 4-inch disc, the speed should be between 3,500 and 6,000 RPM. If you are using a 7-inch disc, the speed should be between 1,900 and 3,200 RPM.
What is the difference between a cutting disc and a grinding disc?
Clue is in the title, a cutting disc is thin and used for cutting and a grinding disc is much thicker and used for grinding not cutting.
