The 5 Inch Paddle Switch Disc Grinder offers an exceptional price-performance value. Features of the 5 Inch Paddle Switch Disc Grinder MOTOR: High torque 10.5 Amp motor to power through the toughest cutting and grinding applications. SWITCH: Large paddle switch, can lock-on or be controlled by user as needed.
angle grinder 5 inch Related Question:
Which is better 4 inch or 5-inch angle grinder?
The number of cuts achieved with the 5” Angle Grinder were 100% greater than the 4 1/2” Angle Grinder. The 41% output power and 36% torque provided by the 5” Angle grinder, meant that the disc speed remained at its optimum, allowing the disc to work more efficiently.
What is the standard size for an angle grinder?
The most commonly used sizes are the 4” and 4 ½”. These grinders typically have the capacity for wheel diameters of up to 7”, with particularly small versions having the capacity for 3” discs.
What is a 4 inch grinder used for?
Angle grinders are versatile tools that can grind metal and cut tile, stucco and pavers, rout out mortar, plus they can sand, polish and sharpen. Learn to use an angle grinder to cut tile, mortar and pavers; make quick work of rust and loose paint removal; sharpen blades and cut or grind steel.
How do I know what size angle grinder I need?
When you begin to look at angle grinders, you will need to decide on what size disc you will require, with the two most common sizes being 4.5” (115mm) and 9” (230mm). The size of the disc determines the depth of the cut possible, so larger jobs will require larger discs.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
Do all angle grinder discs fit?
Angle grinders discs are interchangeable, which means you can select the specific size of disc for your grinder and the specific type of disc for the type of material you are looking to cut or grind. There is a wide range of different types of discs available for an angle grinder.
How deep can a 4.5 inch angle grinder cut?
A 4.5 angle grinder has a blade that is 4.5-inches in diameter. This means the blade extends 2.25-inches for the center in each direction. As a result, it is not physically able to cut through 4 inch concrete. Select a larger grinder when a deep cuts are necessary, such as a 9-inch grinder.
What should I look for when buying a grinder?
A good grinder should be made of durable material. The metal grinders are recommended by they are long-lasting. Grinders made of wood are not as effective because they might contain varnish. It can mix with the product you are grinding, affecting its quality—the durability level of the material you choose matters.
Can I use an angle grinder to cut paving slabs?
Cutting Pavers With a Circular Saw or Angle Grinder Both a standard circular saw (7 1/2-inch blade) or angle grinder (4 1/2-inch blade) make clean, easy cuts and involve similar techniques. In either case, be sure to use a diamond blade made for masonry and stone.
Can you use angle grinder for buffing?
An angle grinder can be used as a polisher but there a few key points to keep in mind. Be sure to purchase a flap disc that has non-abrasive padding on the outer layers to ensure your grinder performs polishing in lieu of grinding. Always polish at low speeds if available.
How deep will a 115mm angle grinder cut?
While 115mm angle grinders offer a maximum cutting depth of only 30 mm, they are precise, easy to handle and lighter than larger versions.
What is a 7 inch angle grinder used for?
Makita Angle Grinder 7 Inch This angle grinder from Makita is a powerful tool that will help you get the job done. It is perfect for grinding and cutting like metal, masonry, and concrete. With a 15 AMP motor, this grinder delivers 6,600 RPM and can handle the most demanding applications.
Can you use wood cutting disc for an angle grinder?
Now, if you’re only looking to cut small woodcuts (like the edges of trim), or carve sections of wood, an angle grinder obviously has it place. But again, just make sure you use either a three-tooth wood cutting disc or a wood carving disc.
What is arbor size on a grinder?
“The “standard” spindle (sometimes called the “arbor”) thread these days on a angle grinder in the US is 5/8-11 (5/8″ diameter and 11 threads per inch).
How long do angle grinder discs last?
1 – Cutting and Grinding Discs Have Expiry Dates. Usually expressed as a month and year, such as 03/2018, these expiry dates are printed to comply with the manufacturing regulation, EN12413:2007+A1. This date is generally printed on the centre ring and is at a maximum three years from the manufacture of the disc.