This cordless angle grinder is made with a high-quality all-cooper motor that gives it a lot of power with little noise and a lot of efficiency. With a small, non-slip handle, it is easy to hold and use.
The angle grinder has a Brushless motor that can run at an unloaded speed of 9800 RPM/min. This is good for things like metal rust cleaning, metal cutting, metal grinding, tile cutting, tile grinding, wood grinding, and wood cutting, among other things.
Heat from the Cordless Electric Angle Grinder comes out through a labyrinth of vents and exhaust holes. This helps keep the engine from overheating and prevents the machine from burning.
The aluminum wheel guard is adjustable and strong, and it protects your safety while you work and keeps dirt out of the tool, which helps it last longer.
Batteries are sold separately. BL1830 BL1830B battery, BL1840 BL1840B battery, and so on.
In case you start the machine by accident, there is a double-function lock-on switch that prevents it from starting and locks it in place for long periods of time. As part of our package, we include an Allen key that makes it easy to change the grinding wheel.
This angle grinder has a “high speed mode” and a “slow mode” that can be used to work. In “slow mode,” the mode lamp is on.
It doesn’t have to be hooked up to anything, so it can be taken anywhere, giving you complete freedom of movement.
Specificatio.
Angle Grinder is the product type.
Hy-3010 is the name of the model.
It’s a type of grinder that doesn’t need a brush.
The power source is a Makita Lithium Battery (Battery is not included.
It has a rating of 18V.
The weight: 1.7k.
21 cm x 11 cm x 32 cm is about the size of the bod.
It takes 1-3 Hours to charge up.
0-9800 r/min: No Load Spee.
Its diameter is 100mm.
The cutting depth: 20mm.
Metal, wood, and other applications.
Speed Control: Speed Control with no step.
It can be used with Makita batteries.
In the 18V Series: BL1890, BL1860, BL1850, BL1840, and so o.
Ble1490, Ble1460, and Ble1450 are all part of the 14.4V series.
How do you put in or take out the battery.
* If you want to take the battery out of the device, push the button on the battery first, then slide it out.
* When installing, do the opposite of what you did before. Use the groove on this machine to do it. Batteries are sold separately.
It’s time to change the operation.
This Angle Grinder has one safety switch built into it, so it is safe to use. Please press the safety switch at the same time as you start the machine.
Switching function with two mode.
This machine can run at high speed and slow speed.
Press the button to change modes. In “slow mode,” the mode lamp is on.
Notic.
It’s time to turn off the switch.
Angle Grinder: Please wait until the offset grinding wheel is completely still before you put this machine in place.
*Don’t put it in a place where there are chips and dust.
* Before you start working, don’t let the rotating part of this machine hit the material it’s going to be working with.
* Turn on the button and make sure the rotation is all the way up before you start to work.
* Do not push the offset grinding wheel very hard against the work piece.
Turning the offset grinding wheel so it grinds on the underside of the outside of the wheel, from 15° to 30°
