Using a diamond blade with your angle grinder gives you a longer life span as diamond blades are much stronger than conventional blades. Another exciting benefit of using the diamond blade with an angle grinder is the quality of performance associated with using the diamond blade. The use of a diamond saw blade with an angle grinder greatly improves the performance of the angle grinder and provides greater leverage than conventional machines.
At Tile This, we offer a wide array of diamond blades for cutting tile in tile installation projects. Regardless of whether you need a 4 inch diamond blade, angle grinder diamond blade, Husqvarna diamond blade or diamond saw blades for porcelain tiles, Tile This is your premier outfitter of all diamond blade products. To learn more about the various diamond blades we offer for your tile cutting needs, or if you have any questions about our tile cutting products, call us today at 952.882.0436 or fill out our contact form.
angle grinder and diamond blade Related Question:
Can you use a diamond blade on an angle grinder?
Diamond blades have very high resistance and cause less heat during usage. The diamond blade can absorb more heat than other blades and is perfect to use with an angle grinder.
What is angle grinder diamond blade?
Diamond blade is an accessory for an angle grinder which is designed for cutting various types of building materials through rotational-translational movements. This disc can be used for both dry and wet cutting.
Does diamond cut metal?
Will Diamond Blades Cut Metal? Yes, certain diamond blades can cut through metal, but this will depend entirely on the blades application. Most diamond blades are used to cut through concrete, brick, tile, and asphalt. But, not all blades are the same.
Can I cut wood with diamond blade?
General purpose dry diamond saw blades can be used for several materials, but reconsider before using them to cut wood. The harsh grit of the diamond blade can cut tile and masonry with straight lines. In most cases, it is better to use a traditional steel blade for wood.
What can cut a diamond?
Diamond manufacturers cut a groove in the diamond with a laser or saw, and then split the diamond with a steel blade. Sawing is the use of a diamond saw or laser to cut the diamond rough into separate pieces.
How long do diamond angle grinder blades last?
Assuming the blade is compatible with the material you are cutting, and assuming you use good technique, the number of cutting hours you can squeeze out of the blade can range from 10 to over 100 hours.
How deep can a 4.5 inch angle grinder cut?
A 4.5 angle grinder has a blade that is 4.5-inches in diameter. This means the blade extends 2.25-inches for the center in each direction. As a result, it is not physically able to cut through 4 inch concrete. Select a larger grinder when a deep cuts are necessary, such as a 9-inch grinder.
What is a diamond blade used for?
Diamond blades are comprised of diamond impregnated segments attached to steel core. They are used to cut cured concrete, green concrete, asphalt, brick, block, marble, granite, ceramic tile, or just about anything with an aggregate base.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
Which way should diamond blade spin?
This indicated the direction – the tail should be behind the comet. If you put a blade on in the direction opposite to the directional arrow you may experience a little slower cutting or a little vibration at first until the diamond is exposed on the opposite side.
Can you cut concrete slab with an angle grinder?
Concrete cutting is a common task at the construction area, such as cutting concrete floor, concrete wall, concrete slabs and concrete pavers. Although the various concrete cutting saw is available, an angle grinder is the most convenient tool for small concrete cutting work.
Can you use an angle grinder on concrete?
An angle grinder can be used to level, smooth and polish concrete by grinding it down. They can also be used to remove paint and floor adhesives. To grind concrete with a angle grinder you need a diamond cup wheel, a dust shroud attachment, and a vacuum cleaner.
How do I choose an angle grinder disc?
depends on the type, shape and thickness of the steel that needs to be cut. For standard everyday jobs on either stainless or mild steel using an angle grinder, choose a 1mm or 1.6mm thickness in your disc. For projects that involve thin metal such as sheet metal, choose a 1.0mm or 0.8mm thinner cutting disc.
Does diamond cut iron?
Diamond is great cutting tool material, but diamond tools (actually technically PCD tools) cannot cut ferrous metals like Steel or Cast Iron. Here’s the reason. Diamond is essentially pure carbon, with atoms arranged in a cubic crystal arrangement that makes it very strong.
Can diamond break through steel?
As an example, you can scratch steel with a diamond, but you can easily shatter a diamond with a hammer. The diamond is hard, the hammer is strong. Whether something is hard or strong depends on its internal structure. A diamond is made entirely of carbon atoms which are joined in a lattice-type structure.
