One of the common pairs of tools that homeowners and DIYers find themselves deciding between getting are an angle grinder and a Dremel. The weight of the angle grinder is significantly heavier than that of the Dremel tool. Dremel tools come with depth control for cutting, but the angle grinder generally doesn’t.
If you have to prioritize the compactness of a tool without scarifying its power, you should go for an angle grinder instead of a Dremel. In general, a Dremel tool is far pricier than an angle grinder. A Dremel can sometimes serve as a universal tool as an angle grinder but at a smaller scale.
Angle grinders and “Dremels” or rotary tools are power tools used mainly for cutting but also for sanding, polishing, and more. A rotary tool turns at as many as 3 times the RPMs as an angle grinder but with much less HP; however, a rotary tool can do detailing that an angle grinder just cannot do. Die grinders are small power tools, similar to rotary tools, but generally weighing up to five times more; a die grinder is like a cross between an angle grinder and a rotary tool.
Speaking of tools, we know woodworking requires many of them. The Dremel is your tool for prepping, cleaning, and plunge cutting. You must have noted by now that both these woodworking tools serve specific purposes.
In a nutshell, the Dremel is a rotary tool designed to work with one hand whereas an angle grinder is a heavier and larger tool intended to operate with two hands. Although not totally accurate, generally speaking, an angle grinder is used for larger projects while a Dremel is used for smaller ones. It is also smaller than a die grinder, a tool that sits between a Dremel and an angle grinder in terms of size, weight and cutting power.
Scenario A:Assuming you already have an existing rotary tool and simply need to cut a handful of rusted and hard-to-reach clamps, then all you would need to purchase is a metal-cutting attachment, such as the Dremel SC406 starter set which includes the EZ SpeedClic mandrel and two fiberglass reinforced metal cutting wheels for around RM35. Most rotary tool uses a collet chuck and are compatible across brands. Once you have the EZ SpeedClic mandrel, you would only need to purchase the Dremel SC456 cut-off wheels if you intend to use the rotary tool for future metal cutting projects. Obviously, going this route is cheaper than forking out four times more for a new angle grinder with a cutting disc in the short term if you do plan on cutting metal in the long-term or if you have a big project on hand, then it’s far cheaper to purchase an angle grinder outright rather than have to deal with small cutting discs.
angle grinder or dremel Related Question:
Can you use a Dremel like an angle grinder?
The quick answer to this question in a pinch is, yes, a rotary tool, such as the Black & Decker RTX1 or the Dremel range, do come with a cutting disc and grinding stones and can be used for cutting or grinding metal, rigid plastic, wood, composites, etc.
What’s the difference between a grinder and Dremel?
The main difference between Dremel and Die grinder is that Dremel is a brand that manufactures Rotary tools along with a wide array of other tools. Die grinder is a type of hand-held Rotary tool that is manufactured worldwide by various brands for performing tasks like grinding, sanding and polishing.
Can I use a Dremel to grind metal?
Dremel’s grinding and sharpening tools help you with both activities, whether you’re deburring metal after cutting it, smoothing welded joints or sharpening secateurs. You can use these tools on glass, ceramics, stone and porcelain too.
Is an angle grinder worth it?
In short, cordless angle grinders are incredibly beneficial due to the added degree of convenience they offer. They also have become just as functional and powerful as their corded counterparts, which makes them a fantastic choice for both the pros and DIYers.
Are rotary tools and Dremels the same thing?
Is a rotary tool the same as a Dremel? Dremel makes rotary tools, but not all rotary tools are Dremels. Both refer to tools that use rotary motion, which refers to spinning on a single axis – much like how a fan rotates. Some other companies that sell rotary tools include Milwaukee, Ryobi, Dewalt, etc.
What can you cut with a Dremel?
The Dremel 561 cuts hard wood up to 3/8″ and soft wood up to 5/8″. Also cuts plastics, fiberglass, drywall, laminate, aluminum and vinyl siding. Use with the Dremel Multipurpose Cutting Attachment (model 565).
Is a Dremel a router?
1. Can a Dremel be used as a Router? Now both these tools are very different from each other, but a Dremel can still be used as a low power Router. There is this specific table tool known as Dremel 231 Portable Rotary Tool; with this tool, you can use a Dremel as a Router.
What is a straight grinder used for?
A straight grinder a hand-held power tool used for grinding using abrasive products such as plain resinoid wheels, flap wheels, or spindle-mounted points and wheels. Grinding is also known also as de-burring, fettling, polishing, sanding and buffing.
What is a Dremel tool called?
Dremel (/ˈdrɛməl/ DREM-əl) is a multinational brand of power tools, focusing on home improvement and hobby applications. Dremel is known primarily for its rotary tools such as the Dremel 3000, 4000 and 8200 series which are similar to the pneumatic die grinders used in the metalworking industry by tool or moldmakers.
Can you sharpen with a Dremel?
A sharp blade will make a knife work work quicker and safer. A dull blade can be reconditioned easily. A Dremel rotary tool makes it easy to not only sharpen your blade, but to polish it as well.
How thick of metal can a Dremel cut?
Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver. Reinforced with fiberglass for increased durability. The EZ409 wheels have a thickness of just 0.75 mm for even thinner cuts.
Which Dremel bits are for grinding metal?
The versatile 3/8 In. (9.5 mm) diameter Aluminum Oxide Grinding Stone works well for extended general purpose grinding on metals, sharpening tools, castings, welded joints, rivets and rust removal.
Do plumbers use angle grinders?
The rapidly rotating disc on an angle grinder doesn’t just smooth, polish, and grind away metal, it can also be used for cutting through metal. This is a common use for plumbers who are working with galvanized iron or lead pipes.
Is a brushless angle grinder better?
The brushless motor doesn’t only make it durable but also as powerful as some of the most powerful corded angle grinders out there. With a maximum speed of 8500 RPM, we can see why the comparison is easy. Meanwhile, the metal casing and durable gears will ensure long life with minimal chances of malfunction.
Are Dremel tools safe?
No Metal:Using the dremel on metal will destroy the tool and produce sparks, which can ignite sawdust, resulting in a fire or explosion. Safe Bystanders:If you are using these tools outside of the Woodshop, which likely means you are in the workspace, make sure everyone around you is safe.
