For vex, using an angle grinder is usually going to be over kill unless you are cutting most everything lengthwise. For what you are going to use it for an angle grinder would be quicker, however a dremel tool will work nearly or just as well since they wont be a single continuous cut, but rather small ones connecting the center holes. If you are planning on cutting a lot of steel and using it for larger projects outside of vex, an angle grinder will be better.
Carbide blades always end up wearing out or chipping and instead of replacing these blades with some high dollar metal blade that’s going to do the same thing in a week; I prefer to use the cheaper carbide blades. You can get these blades just about anywhere for a decent price – The Dremel Ultra Saw is also compatible with the Rotozip and Zipmate blades. I’m not sure how many times you can use this blade without it being destroyed seeing as how it has a bunch of glued on carbide on its surface, but I’ll bet after a few good grinds, you’re going to have to pick up a new blade.
The angle grinders dont leave a nice clean cut like a blade will ya know, they cut a wide gapeing trough that needs extra long stitches to sew it only partially closed. It takes a long time to heal and fill that crater with new fatty tissue and skin. At least I didnt snag an intestine, I could see white colestral in there.
One of the common pairs of tools that homeowners and DIYers find themselves deciding between getting are an angle grinder and a Dremel. The weight of the angle grinder is significantly heavier than that of the Dremel tool. Dremel tools come with depth control for cutting, but the angle grinder generally doesn’t.
If you have to prioritize the compactness of a tool without scarifying its power, you should go for an angle grinder instead of a Dremel. In general, a Dremel tool is far pricier than an angle grinder. A Dremel can sometimes serve as a universal tool as an angle grinder but at a smaller scale.
The new Dremel Ultra-Saw, model US40-01, is boasted as a versatile 3-in-1 tool. The US40-01 kit comes with the saw itself, a 3.5″ metal-cutting wheel, 4″ carbide wood cutting wheel, 4″ wood flush cutting blade US600-01), a 4″ diamond abrasive surface prep wheel, a side handle, and kit bag. If you’re looking for a more wood-cutting-focused tool and don’t need the metal-cutting or surface-grinding features of the Dremel Ultra-Saw, the new Rockwell mini circular saw is a strong contender that’s compatible with a more standard blade size.
Dremel says its primary goal in developing the cordless Ultra-Saw US20V was to create one affordable, easy-to-maneuver tool that handles a number of simple, and advanced DIY project tasks, versus requiring several different cutting, sanding, and grinding devices to get a job done. Inside the box, the Dremel Cordless Ultra-Saw US20V set is comprised of ten pieces, with three 3.5-inch cutting discs and 7/16-inch wheel arbor and tool, a 20V MAX battery, 20V charger, three attachments, and a durable cloth carry/storage bag. For the price, the Dremel Ultra-Saw US20V setup is a great value, especially if DIY projects require cutting, as well as stripping/grinding/sanding materials.
angle grinder vs dremel ultra saw Related Question:
Can I use a Dremel as an angle grinder?
The quick answer to this question in a pinch is, yes, a rotary tool, such as the Black & Decker RTX1 or the Dremel range, do come with a cutting disc and grinding stones and can be used for cutting or grinding metal, rigid plastic, wood, composites, etc.
Is an angle grinder the same as a Dremel?
These two handy tools offer two power source options – corded and cordless. But there is one small difference. Corded angle grinders use electricity or air pressure, while corded Dremels only have one power supply option – electricity. When comparing power source and performance, angle grinders trump Dremels.
Is a rotary tool the same as a grinder?
Die Grinders are generally heavy-duty power tools that are both heavier and larger than rotary tools / Dremels. Though a Die Grinder is technically a rotary tool, it is generally not referred to as such. Die Grinders are often pneumatic, though there are electric models, too.
Can Dremel cut through steel?
Metal Types a Dremel Can Cut As a general rule, sheet metal refers to steel, either galvanized or stainless. This metal is safe to cut with most commercially available cutting tools such as Dremel attachments.
Is a multi tool the same as an angle grinder?
Both angle grinders and oscillating tools have various attachments to perform multiple functions. There are different blades for each specific task. For instance, an oscillating tool has a straight blade attachment to cut various materials. Similarly, you can use scraping tools, toothed blades, or sanding pads.
Can I use bigger disc on angle grinder?
Fitting a 14 inch (356 mm) cut-off disc to a 9 inch (230 mm) angle grinder will increase the edge speed excessively to at least 120 m/s (430 kmph). The photograph below shows an angle grinder with the wrong size cutting disc fitted and the guard removed.
Do angle grinders cut wood?
An angle grinder is a power tool that can be used for different projects. You can cut metal, aluminium, concrete, bricks, pavers, wood, and other dense materials; you can sand and polish different surfaces to sharpen tools and grind materials.
Can I sand wood with an angle grinder?
When you need to remove or sand a lot of surface wood away, turning your angle grinder into a sander is the easiest and most cost effective way to do it.
Can a Dremel ultra saw cut a 2X4?
Bought this for my dremel ultra saw. It works real well and makes cutting a 2×4 easy with the tool. Only thing is you need to adjust to where the saw blade is on the tool when you use it. Using the flush cutting blade the cutting guide needs to be pushed back more than being on the line.
Can a Dremel cut a 2X4?
Overview. The Dremel MM494U pipe and 2X4 blade is made for cutting pipe and thick materials such as 2X4 studs. With an extra wide cutting edge, the VC494 adds control and convenience because users can now easily cut PVC, conduit and copper pipe without the blade slipping off of the work-piece.
Do Dremel bits fit rotary tools?
Will Dremel attachment work on all Dremel rotary tools? Yes and no. All Dremel attachments can be connected to Dremel rotary tools with a threaded nose. But not all combinations of tool and attachment will work optimally.
Can I use my Dremel as a Rotozip?
Are Dremel Bits Compatible With The Rotozip? The tools have different motions, and the Dremel bits aren’t likely to work well with the Rotozip. There is some overlap in their bit sizing, though. The Dremel uses bits from 1/8 inch down to a tiny 1/32 inch.
Can a Dremel saw wood?
The Dremel 561 cuts hard wood up to 3/8″ and soft wood up to 5/8″. Also cuts plastics, fiberglass, drywall, laminate, aluminum and vinyl siding. Use with the Dremel Multipurpose Cutting Attachment (model 565).
Can a Dremel cut cast iron?
This cut-off disk can be used on different metal types, like aluminum, copper, cast iron or even hardened steel.
Can a Dremel cut a screw?
A Dremel is a great tool for cutting small metal objects like screws, and the small cutting discs that the Dremel offers are perfect for this. And don’t be afraid to try cutting thicker pieces of metal with the Dremel, it can handle fairly thick bolts as well.
