It’s ideal for use as a base for riveting, drilling, and staking small components.
Case hardened steel is used in its construction.
There are 15 holes and 5 slots in this design.
1-5/8 inch by 3/4 inch (approximately.
Holes range in size from 3/64 inch to 1/4 inch (1.2 millimeters to 6.4 millimeters.
Our hex anvil, which is used as a base for riveting, drilling, and staking small parts, is case hardened and highly polished for long service life. Each anvil is equipped with 15 holes ranging from 3/64″ to 1/4″ (1.2mm to 6.4mm) in diameter and five slots. 1-5/8″ x 3/4″ is the size of this item.
This is a fantastic little riveting tool for the price. It’s a technique I like to use a lot in my jewelry projects, and it makes the process of making rivets very simple. As a result of the lack of clear instructions on how to use this tool, I’ve had to rely on trial and error to get things done. I picked up a new trick the other day. To create a head for your rivet, melt the end of your wire in the same manner as you would if you were creating a headpin. It provides a generous surface area for the rivet to spread out on!
