“Before you perform any depth gauge maintenance you need to learn what the setting is. The image above is an Oregon brand cutter tooth. As you can see, the correct depth,.025”, is stamped on the depth gauge. Low depth gauge settings require more power from your saw motor, shorten the life of your chain, cut rougher, increase operator fatigue, and increase the risk of kickback injury. Each file stroke does not take an equal amount of material from the depth gauge.
Chainsaw depth gauges are necessary for proper chainsaw maintenance. If you find a depth gauge that is higher than the guide, use a flat file or a grinding wheel to file the depth gauge so it is lower than the cutter. If you only file the depth gauges on one side, your chain will cut crooked because it will automatically pull to the side of the chain with the lower depth gauges.
Of course, the correct depth gauge height for any particular job can be altered by the size of the saw, the length of the bar, the type of chain, the size of the tree, the type of wood, and maybe even the phase of the moon! I’ve met a lot of line cutters and loggers in my day and I found the ones who cut with a poorly sharpened dull chain always filed the depth gauge down low.040 and over……. to compensate for their poor sharpening skills. We allowed low settings when the chains cutters were filed down small and the depth gauges were progressively lowered with the Carlton File O Plate where the setting would be approximately.
are all chainsaw depth gauges the same Related Question:
How do I know what gauge my chainsaw is?
Measuring Your Chainsaw Bar To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
Can I put a different gauge bar on my chainsaw?
Drive sprockets can drive any gauge chain, only the pitch matters.
What gauge is best for chainsaw?
058″ or . 050″ thickness where it fits into the bar rail. The most popular and readily availble gauge for 3/8″ pitch chain is . 050″ and that is what I recommend because bars and chain loops are readily available and are more competitively priced.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Can I put an Oregon bar on a Husqvarna chainsaw?
Oregon Bar and Chain Set For Husqvarna Chainsaws 16″ with . 050 Gauge Oregon # 108579 Fits Husqvarna models 33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 57, 133, 140S, 154, 234, 238, 240, 242, 246, 254, 340, 444.
Are chainsaw blades universal?
No, chainsaw blades are not universal, not every bar and chain will fit on your machine. Chainsaw chains need to have the correct specification to fit on your bar. If you have a chain that is too long or too narrow it will not fit. Mixing brands of chains is no problem as long as they are compatible.
Will a Poulan bar fit a Husqvarna?
The older Poulan bar slot is for larger bar studs which will fit on the smaller Husqvarna 435. Just needs a homemade wire adapter to snug it up. Poulan bar may oil through its adjuster hole, if not easy to drill a new hole. Only thing to worry about is chain pitch size and drive link gauge thickness.
What happens if you file rakers too low?
If the rakers aren’t at the right depth, your saw won’t self-feed and you’ll find yourself pushing down on the saw as you cut. That not only wears you out, but it wears out the bar and chain as well.
What do chainsaw chain numbers mean?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The first number represents the pitch: 1 = 1/4″ 2 = 0.325″
What is the .50 on a chainsaw chain?
Common saw chain gauge sizes are . 043″ (1.1mm), . 050″ (1.3mm), .
What does the gauge mean on a chainsaw chain?
Chain Gauge is the Drive Link’s thickness where it fits into the guide bar groove, matching the guide bar gauge. The gauge of the chain and the gauge of the bar must match.
Are .325 and 3/8 chains interchangeable?
You can replace a 3/8 Oregon PowerMatch nose with a . 325 PowerMatch nose on any length of Oregon PowerMatch bar you want. Then when you use up the . 325 chain just put the 3/8 nose and rim sprocket back on.
Does pitch matter on a chainsaw chain?
Yes, pitch does matter. If you change to . 325 chain you will also need to change the drive sprocket. If the saw has a floating rim then just change that, otherwise it is a new drum which may not be available.
What is the correct file size for 325 Stihl chain?
325″ Pitch Saw Chains. STIHL Files come specifically designed for each pitch of saw chain, with this particular round file suited for use with a . 325″ pitch chain. The file size is 4.8mm x 200mm.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.