To answer the initial question: No, chainsaw blades are not universal. Chainsaw blades actually have two different components: the bar and the chain, which is the rotating chain with metal teeth that affixes to the bar and is actually responsible for cutting. Now that you understand that chainsaw blades aren’t universal, you know that you’ll need to keep your chainsaw’s specifications in mind when choosing a new chainsaw chain and bar.
Since the built-in engine has no generator to slow it down, this type of chainsaw usually requires a lengthier bar; as a result, gas-powered chainsaw chains offer a convenient range of use. The type of chainsaw you will need will vary accordingly to the chainsaw that you have or the purpose your chainsaw will serve. You might be surprised that chainsaw chains are not as universal as everyone thinks.
are chains for chainsaws universal Related Question:
Are all 14 inch chainsaw chains the same?
The size of a chain saw’s chain does not always correspond to the size of the guide bar. Determining the correct size of chain for a chain saw with a 14-inch guide bar involves several factors, including the size of the drive lugs and their distance from each other along the chain.
Can I use a different brand chain on my Stihl chainsaw?
Stihl manufacturers replacement parts, including chains, as well as chain saws. Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw.
Will a 16 inch chain fit a 14 inch bar?
This length differs from the overall length, which manufacturers use less than the cutting length. A Poulan 14 chainsaw can operate with a bar that’s 12, 14, 16 and 18 inches length. However, a larger bar may not always give the best cutting performance.
What are the different sizes of chainsaw chains?
Chainsaw chains are available in the following pitch sizes, measured in inches: 1/4″, . 325″, 3/8″, 3/8″ low-profile, and . 404″.
Do all chains fit all chainsaws?
Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That’s why electric saws use bars 18″ and shorter. Similarly, chainsaw chains are measured to fit certain bars.
Does the number of links in a chainsaw chain matter?
Number of links is to fit the bar – pitch is to fit the sprocket. Show activity on this post. Since the number of links is larger(81 instead of 74), there is low chance that it would fit properly.
Can I use an echo chain on a Stihl chainsaw?
STIHL 63PM3-56 16-inch Chain Saw Chain – Fits Homelite, Poulan, Echo, Remington and Craftsman.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.
Whats the difference between green and yellow Stihl chains?
Others will chime, looks like green is homeowner (and dirty condition) safety chain. That stays sharper longer in dirty conditions. The yellow looks like full chisel, cuts faster but dulls quicker. I like full chisel and just keep it sharp.
What size chain is on my Stihl chainsaw?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
Will a 520 chain fit a 530 sprocket?
The OP asked if a 520 sprocket could be used with a 530 chain, the answer to this is yes it can without any ill side effects, its not any more likely to jump off than if it were on a 530 sprocket.
What is metric chain?
metric (SI) units. 20.1168 m. The chain is a unit of length equal to 66 feet (22 yards). It is subdivided into 100 links or 4 rods. There are 10 chains in a furlong, and 80 chains in one statute mile.
Are most chainsaw chains interchangeable?
No, chainsaw blades are not universal, not every bar and chain will fit on your machine. Chainsaw chains need to have the correct specification to fit on your bar. If you have a chain that is too long or too narrow it will not fit. Mixing brands of chains is no problem as long as they are compatible.
What does pitch mean on a chainsaw chain?
Pitch. Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches – 1/4″ is the smallest, 3/8″ is the most popular, and 3/4” is the largest.
Can you change bar length on chainsaw?
Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.