If you do not need a large-scale sawmill, there’s absolutely no need to spend more money on one and you would be better off with a chainsaw mill. In order for you to be able to fit your chainsaw into the sawmill, it must be compatible or else it won’t fit. Before you proceed with purchasing a sawmill, you need to make sure that your chainsaw and the sawmill are actually compatible, unless you plan on purchasing an additional chainsaw.
Chainsaw mills are small sawmills designed to be used by just one or two operators to mill logs into lumber. More elaborate chainsaw mills consist of a track and frame system to which the chainsaw is mounted. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Like we stated in the intro, chainsaw mills aren’t worth it for four reasons: labor, cost, time, and waste. I know I’ve been pretty critical of chainsaw mills up to this point, but there is one reason why a chainsaw mill could be worth it. Chainsaw mills aren’t worth the physical and time demands required to mill the logs.
As mentioned, most chainsaw mills clamp the chainsaw bar. Chainsaw mills fall into two categories: edging mills and horizontal mills. Keep reading to learn more about some of the best chainsaw mills on today’s market.
If you are in a hurry and just want to find out what the best chainsaw mill is, then we recommend the Granberg ChainSaw Mill G777 as the best one. Finally, you need to find the best chainsaw mills for the money that is compatible with the type of chainsaw you own. Heavier chainsaw mills do not make the best portable chainsaw mill, so if you cut logs deep in the woods, a lightweight mill will be a better choice.
are chainsaw mills any good Related Question:
Do chainsaw mills work good?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
Is a saw mill worth it?
A portable sawmill can be worth the investment. It can provide a source of wood for your own projects and give you a side business. For a source of lumber, as well as a profitable business, a portable sawmill can be a key piece of equipment on your farm.
How fast are chainsaw mills?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
How big of a chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
Can you mill with a chainsaw?
The most critical tool is obviously a chainsaw. In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut.
What is a chainsaw mill used for?
A chainsaw mill or PortaMill or Alaskan mill or Alaskan sawmill or Logosol sawmill is a type of sawmill incorporating a chainsaw, that is used by one or two operators to mill logs into lumber for use in furniture, construction and other uses.
How much is a good saw mill?
Band saw mills start at around $4,000 for an entry-level model. A top-of-the-line machine, with a hydraulic loader and attachments for planing and sanding, can handle extra-wide logs. They cost as much as $70,000. Prices for a swing-blade sawmill can range from $6,000 to $40,000, with $20,000 about average.
Is it cheaper to buy lumber from a sawmill?
Though it may not appear bad, the cost of lumber in big box stores is VERY expensive. You don’t realize it because you don’t have anything to compare it to. Buying your lumber directly from a sawmill can be significantly less, though there may be additional preparation needed before it can be used as we will see below.
Do dead trees make good lumber?
Yep, it’s worth it. If you sell the wood, you will have to find or create a market. Most that I have sawed has been treated and the bugs killed. Buyers will want to be assured that the wood is bug free.
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
What chainsaw do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Does skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
Can I cut planks with a chainsaw?
Yes, you can mill a log using a chainsaw, but you need some appropriate attachments. Normally, chainsaws are used to cut across the grain of trees, but it can be adapted in such a way that it cuts efficiently along the grain to mill logs into planks, boards, or beams.
Where are Woodland Mills sawmills made?
Woodland Mills sawmills are indeed manufactured in China.
Where are Wood Mizer sawmills made?
Wood-Mizer is a sawmill manufacturer that also produces sawmill blades. Modern manufacturing facilities in Indianapolis and Batesville, Indiana USA and Kolo, Poland guarantee maximum quality at an affordable price anywhere in the world.