Today I have the opportunity to see if that holds true with the 16-inch EGO Chainsaw, model CS1604. The EGO Chainsaw Model CS1604 got much better from there. Only two of the eight saws in the competition were able to cut through an 8-inch pine log in under 6 seconds, and one of them was the 16-inch EGO Chainsaw at 5.76 seconds.
are ego chainsaw bars interchangeable Related Question:
Can you put different bars on chainsaw?
Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
Are chainsaw bars and chains universal?
No, chainsaw blades are not universal, not every bar and chain will fit on your machine. Chainsaw chains need to have the correct specification to fit on your bar. If you have a chain that is too long or too narrow it will not fit. Mixing brands of chains is no problem as long as they are compatible.
What size chain does a ego chainsaw use?
The EGO 14″ chain saw chain is the only chain we recommended for use with the EGO POWER+ 14-inch Chain Saw (CS1400 models). The replacement chain features a low-kickback design to enhance user safety. EGO parts are designed specifically for your EGO POWER+ products and offer the highest quality, performance, and value.
What kind of oil does a ego chainsaw use?
OVERVIEW. The EGO POWER+ 32 Fl Oz Premium Bar and chain lubricant is recommended for use with EGO POWER+ Chain Saws to extend bar and chain life for superior performance. The premium oil-free formula outperforms traditional bar and chain oils and is 100% bio-based and biodegradable.
How do you match a chainsaw bar?
To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.
Can I put a 20 inch bar on my 18-inch chainsaw?
Changing the bar and chain on your 18-inch chain saw to a 20-inch size will enable easier cutting of larger trees and branches. Larger chain saws cut through thicker trees and limbs.
Are chains universal?
No. Not all makes and models of bike chains fit on all bikes. Most modern bike chains are made to the one-half inch pitch, but this dosn’t mean all chains fit all bikes.
Are all 14 inch chainsaw chains the same?
The size of a chain saw’s chain does not always correspond to the size of the guide bar. Determining the correct size of chain for a chain saw with a 14-inch guide bar involves several factors, including the size of the drive lugs and their distance from each other along the chain.
Is EGO owned by Home Depot?
The Home Depot Inc. (NYSE: HD) said Tuesday it’s “accelerating its investments” in the reset as it “refines and simplifies its primary brands across the category.” That means, in part, discontinuing the Ego line of outdoor power tools, owned by Chervon Group, and have been sold at Home Depot since 2014.
Do All EGO products use same battery?
Yes! ALL type of EGO batteries are interchangeable to all equipment. The only difference are the run times.
Does the EGO chainsaw need oil?
Although the EGO 56V Chainsaw doesn’t require you to mess around mixing gas and oil to power it, it does need oil to lubricate the bar and chain, just like any other chainsaw. A chain spinning at 6,300 RPM is going to generate a lot of friction, which means heat, so it definitely needs lubrication.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
How long does an ego chainsaw battery last?
Due to their high capacity, all EGO batteries can be stored unattended for a minimum of 10 years without damaging capacity and cycle performance. After 30 days batteries discharge to 30% capacity (to ensure longevity).
How do you measure a chainsaw bar for a new chain?
Measure the distance from the tip of the chainsaw bar to the point where the bar first emerges from the saw’s casing. A tape measure will provide that information. Round the measurement up to the nearest even number if the figure was uneven or fractional. The resulting number is the bar measurement.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.