Saw these cheap on ebay and only plan to use it for some milling.
It’s been about 6 yrs since I last used the Laser chain when I bought my then new Husqvarna 372XP, at the time that was what we were getting on our Husky saws in this region. Myself having used Oregon chain starting back in the early ’70s and even had the oppurtunity to field test the very first LG [now LGX] in 1980-81, I found the Laser rebadged LGX chain seemed to hold an even better edge then what the official stuff did. I just brought it up thinking you may have some of the old inventory of Laser chain, or the possibility Oregon is rebadging old non Anti-Vibe LG chain for their customers.
are laser chainsaw bars any good Related Question:
Are laser chainsaw chains any good?
Laser chain is a fast cutting, professional quality saw chain with superior strength and durability • Chromed cutters with ramped depth gauges for longer life and smoother cutting performance • Available in chisel and semi-chisel cutter configurations • Safety styles meet all ANSI standards for low kickback chain •
How often should you replace a chainsaw bar?
If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.
Where is Prokut chainsaw chain made?
All PROKUT products are manufactured to exacting standards of strength, durability and quality. These products have been rigorously tested in Australia, so you have peace of mind the range can handle all job types.
How long should a chainsaw bar be?
The most common chainsaw bar sizes are 12 to 20 inches, but they come in sizes as large as 72 inches, typically for professionals. The longer the bar, the heavier the chainsaw.
Can I use an Oregon bar on a Stihl chainsaw?
Chainsaw Bar & S55 Chain, Fits Various Stihl Models (105668) | Oregon Products.
Who makes Oregon chainsaw bars?
Our History In 1947, the Oregon Saw Chain Manufacturing Corporation was founded with four employees and one product. Today, the Oregon brand is part of Oregon Tool, Inc, a corporation with more than 3,000 employees and thousands of products.
Why does my chainsaw chain get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why does my chainsaw always cut to the right?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
Do chainsaw bars make a difference?
Regardless of where they are made, there is a huge difference between the two brands of chain and bars. They use different formulations of steel with different hardness levels. I can tell the difference in the chains just by how they sharpen with a file.
How do I know if my chainsaw is blunt?
When looking at the chain itself if you can see a line of light on the cutting edge, the chain is blunt (see below). The teeth on a chain are chrome plated; the thin hard chrome edge of the chain does all the work.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
How big of a tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.