The band saw and the chop saw are two powerful machines that can serve a variety of purposes. The band saw and the chop saw are similar in some ways. You can choose between a compact band saw, which is portable, powerful, but it has less capacities, and a standard band saw that comes in a benchtop or freestanding option.
There’s 3 common tool choices for cutting metal tubing: Abrasive chop-saw, Horizontal band-saw, Cold saw. An abrasive chop saw is the most cost effective way for cutting metal tubing and Also by far the most obnoxious and inconsiderate to fellow co-workers. These saws are extremely loud and generate a great deal of metal dust.
Since your comparison just includes the band saw vs the chop saw, I would go with the band saw just because that chop saw makes me wanna scream…especially on Monday morning But seriously, I really have done my time on both machines, and a properly maintained band saw will do the better job in my opinion. If you really want a cut that is heaven sent though, use a cold saw. I know they hurt the wallet, but they sooth the soul my brotha Good luck, Rev.
I guess it depends on what you’re using it for, and where you’re using it. The chopsaw is definitely more portable, and possibly will cut faster, but i like my bandsaw-it’s quiet, makes a very clean cut, and i can set it and let it cut while i’m doing something else and it shuts itself off when done cutting. I’ll likely pick up a chopsaw someday when i find a good deal on one at an auction, but i don’t need one bad enough to buy new.
Looking for a saw to cut exact 90º and 45º angles in tube steel. I value accuracy and build quality the most when looking for tools, so I’d prefer not to get something that’s going to be consistently off by half a degree like my previous miter saw. I only have experience with upright band saws for cutting wood so I’m not even really sure what I’m looking at when I see one of the metal-dedicated band saws.
band saw or cut off saw Related Question:
Which is better a bandsaw or a scroll saw?
If you want to make fine detail cuts, inside cuts, make patterns and letters, and you want to do so on smaller pieces of wood, the scroll saw is what you want to go with. However, for large, straight, and aggressive cuts on larger pieces of wood, and even metals, the band saw is the way to go.
What are the disadvantages of a band saw?
The Disadvantages: A bandsaw is limited to the size pieces you can cut because of the circular blade. With the Speedster Bandsaw and Diamond Laser 3000, the maximum size glass piece is approximately 10 to 12 inches in diameter. 2. It does not take the place of simple cuts.
What is a band saw best for?
Band saws are amazingly versatile tools. They’re primarily used for making curved cuts, resawing boards and ripping rough material. They’re also relatively free of kickback because the blade only moves downward, not out toward the user like the blade on a table saw.
Is a band saw good for cutting wood?
With the correct blade, a band saw can cut wood or metal, in either curves or straight lines. Blades come in a variety of widths and tooth counts. Narrower blades are good for tighter curves, while wider blades are better at straight cuts.
Do I really need a scroll saw?
So, unless you’re about to start a project requiring the precision of a scroll saw, such as intarsia (wood mosaic) projects or wooden children’s toys and puzzles, you don’t need one. If you are a tool junkie or experimental woodworker, if you don’t already own one, a scroll saw is probably already on your wish list.
What is the difference between a jigsaw and a bandsaw?
Bandsaws are used almost exclusively for re-sawing projects. Jigsaws are, by definition, hand power tools that cut with a reciprocating motion and are generally used to make various curved cuts on thinner material.
What are 5 general guidelines for using the band saw?
Never push on back of piece with fingers or thumb. Don’t reach across the blade. Make all cuts under power, not while blade is coasting. Never remove guard unless authorized by Technician or WRL Manager.
What are the advantages of a scroll saw?
Scroll saws are often used to cut intricate curves and joints, a task they can complete quickly and with great accuracy. They can also be used to cut dovetail joints and are a common tool for thicker intarsia projects. When a fine blade is used, the kerf of a scroll saw is almost invisible.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
Can a band saw cut steel?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
How high can a bandsaw cut?
The resaw capacity is the maximum height (thickness) that can be cut. For the small shop furniture maker, go with 14″ as the minimum for a bandsaw, though 16″ is better. Those doing larger work might even want 18″ or 20″ machines. Just make sure you have a minimum resaw height of 12″ for versatility.
What is the difference between a wood and metal band saw?
A metal cutting bandsaw is typically built more solidly than a saw designed for cutting wood, so there are no issues with the machine itself. As for the blade, the wood fibers could clog the metal blade’s teeth more quickly, and the blade will probably cut through the wood more slowly.
Can I use metal saw to cut wood?
You can use a metal blade to cut wood. A circular saw blade cut metal in a sluggish rotational speed of 25m/s. They are driven by a motor having high power and an A/C vector drive. They are long lasting and non-reusable.
Can you cut a 2×4 with a scroll saw?
Though scroll saws are generally intended for thinner pieces of wood, they can be used to cut a 2×4. They’re pretty versatile little saws, but make sure to take your time with them. The key to success when tackling a 2×4 with a scroll saw is patience, care, and not pushing the wood too hard.
How thick of wood can a scroll saw cut?
Wood Thickness Scroll saws are capable of cutting, or can be made to cut, wood up to 2 inches thick — but it’s not advisable. Unless you’re cutting very soft wood it can result in damage to the blade, the saw or your fingers from pushing too hard.