A high-quality band saw may be able to meet or exceed performance expectations that previously were achievable only with a circular cold saw. If you can cut pieces in layers, then a band saw can compete nicely with the volume throughput of a circular cold saw. In comparing a fully automatic band saw to a fully automatic circular cold saw, generally speaking a band saw costs significantly less than a circular cold saw.
A band saw gives a larger cutting capacity, whereas a cold saw limits your cutting capacity. While the initial price of a cold saw blade may be higher than a band saw blade, it’s important to remember that a cold saw blade can be re-sharpened. At SEPCO, we provide a band saw cutting and precision cold cutting saws that are both accurate and fast.
10-29-2009, 08:58 PM #1 Cold Saw Vs. Band Saw Right now the only saw I have is a chop saw and that thing sucks. Not true if the cold saw is semi auto type…which is the only type to buy really…a manual cold saw is a silly choice, unless it’s a non ferrous type, in which case it cuts so fast that manual use is ok. A manual cold saw uses round, HSS blades, that can be resharpened over and over and over again- I have cold saw blades that are ten years old.
The most important difference between cold saws and band saws is the amount of burr on the cuts that they produce. A band saw can give you good quality cuts, but can’t match the smoothness of results from a cold saw. Due to their straight blades, band saws also cut material more quickly than comparable cold saws.
The band saw type can be either hozontal or vertically oriented – I’ll get to that shortly. The main advantage of the horizontal cutt-off saw is they don’t have the hub assembly to worry about, but rather have a bridge that generally allows larger workpieces to be cut. CAUTION – because the parts will usually be hand held, you need to take a lot more care, as any saw will take fingers, thumbs even, in some unfortunate cases, hands off without even slowing down – they’re used a lot in meat processing partly because of that.
band saw vs cold cut saw Related Question:
What are the disadvantages of a band saw?
The Disadvantages: A bandsaw is limited to the size pieces you can cut because of the circular blade. With the Speedster Bandsaw and Diamond Laser 3000, the maximum size glass piece is approximately 10 to 12 inches in diameter. 2. It does not take the place of simple cuts.
What is a band saw best for?
Band saws are amazingly versatile tools. They’re primarily used for making curved cuts, resawing boards and ripping rough material. They’re also relatively free of kickback because the blade only moves downward, not out toward the user like the blade on a table saw.
What kind of cuts are band saws most used for?
With the correct blade, a band saw can cut wood or metal, in either curves or straight lines. Blades come in a variety of widths and tooth counts. Narrower blades are good for tighter curves, while wider blades are better at straight cuts.
Can a meat saw be used as a band saw?
Official Greeter. Good point – Keep that in mind whenever using the bandsaw – butchers use them to cut through bones.. Yes, the blade will need to be changed and the speed may be different, but apart from that there should be no problem… Sydney, Australia.
What are 5 general guidelines for using the band saw?
Never push on back of piece with fingers or thumb. Don’t reach across the blade. Make all cuts under power, not while blade is coasting. Never remove guard unless authorized by Technician or WRL Manager.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
Can a band saw cut steel?
Band saws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 band saw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
Why is a band saw called a band saw?
The band saw gets its name because the blade that cuts the stock is a narrow steel strip where the ends have been welded together to form a continuous band.
What is the difference between a band saw and a jigsaw?
Bandsaws are used almost exclusively for re-sawing projects. Jigsaws are, by definition, hand power tools that cut with a reciprocating motion and are generally used to make various curved cuts on thinner material.
What is the difference between a meat bandsaw and a wood bandsaw?
The main difference between a wood band saw and a meat band saw is the blade. There are many types of band saw blades; some are better for cutting wood and others are better for cutting meat. If you are looking to convert a wood band saw to a meat band saw, then the easiest way is to replace the blade.
Can you cut frozen meat with a bandsaw?
If your saw blade is no longer making easy and clean cuts it may be time for a replacement. This Assure Parts 126″ band saw blade will slice through frozen meat with ease and make cutting and portioning a whole lot easier.
Can you cut wood on a meat saw?
Blade speeds on meat saws run 3500 SFPM (surface feet per minute) so your speed is fine for wood cutting.
How important is a bandsaw in a woodshop?
That being said, a quality band saw will do a lot more than just cut curves. They are great for cutting tenons and some smaller rabbets, for ripping small pieces of stock, and for resawing thin strips from larger pieces of wood.
What is the margin of safety on a band saw?
Maintain a 4” margin of safety! Your hands MUST be at least 4” away from the blade when the saw is running. 8. Plan ahead saw cuts to avoid backing out of curves whenever possible.