Premium blades have hardened teeth, and they far outlast ordinary blades. We tested all the premium resaw blades we could find that can safely be used on a 14-in. If you do a lot of resawing, you may find bi-metal blades worth the extra money because the extra-hard teeth are designed to outlast hardened carbon-steel blades.
Having the best blade for resawing is crucial if you want the best outcomes. We wanted to put resawing blades in the spotlight, to give you the lowdown on exactly which bandsaw blades are the best. Choosing the best bandsaw blade for resawing presents so many options.
There is no doubt the Timber Wolf Bandsaw Blade is an ideal bandsaw blade for resawing. “For a decent resawing bandsaw blade, we recommend a maximum blade thickness of 0.025 inches. Otherwise there might be a problem with tensioning and metal fatigue. Thinner blades have narrower kerf and are used for special jobs such as veneer sawing or resawing tasks.”Most 14″ saws are just not built to properly tension a blade thicker than.025” and the thicker the blade the more tension it takes to make it work properly. We hope our reviews of the best bandsaw blades for resawing, has addressed what makes a bandsaw blade suited specifically for this purpose.
Our famous Wood Slicer bandsaw blade cuts smoother and quieter than any other resawing blade on the market. Since noise intensity is halved with each 3dB decrease in sound level, our Wood Slicer Bandsaw Blades will subject your ears to no more than 1/4 of the sound intensity of the noisier blade, and at best can reduce noise intensity to less than 1/16 of what you might usually endure. Unless you’re actually fond of listening to a bandsaw blade scream though thick stock, our blade design will be the best you’ve ever heard on your bandsaw.
The first step is giving your bandsaw a good tune-up to set the table perpendicular to the blade, get peak performance from the guides, and ensure the blade tracks true. “With your saw well-tuned, turn to the blade. Resawing wide boards requires a blade that cuts evenly throughout the stock’s thickness while evacuating large amounts of sawdust. The wider the blade, the straighter the cut, so use the widest blade your bandsaw can handle. Most saws accept at least a 1⁄2”-wide blade, and many even wider. Typically, a wide 3-tooth-per-inch blade provides the perfect blend of aggressive yet smooth cut and sawdust evacuation that resawing requires.
It’s better to have 3 TPI blades on a 14-inch bandsaw for resawing. Timber Wolf blade is one of the best choices for the resaw bandsaw blade. We can use the blade for the super and delicate cut because of being 10TPI. If you’re planning to get a wood slicing blade with consistent performance, you should go for Powertec 13117X resawing blade.
The amount of drift varies with every blade, but you can compensate for it by clamping your fence to match the drift angle. SINGLE-POINT FENCE. Another way to overcome blade drift is to use a single-point fence like the one shown in the left photo above and in the margin. SETTING THE FENCE TO COMPENSATE FOR BLADE DRIFT. FEED RATE & TECHNIQUES. With either style of fence, your saw will help you determine the feed rate for resawing.
bandsaw blades resaw best Related Question:
What bandsaw blade is best for resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
What should I look for in a resaw blade?
The article analyzed the most important features that help determine the performance of a resawing blade, namely blade thickness, blade width, number of teeth per inch, tooth form and durability.
How many teeth do you need to resaw a blade?
Typically, a wide 3-tooth-per-inch (tpi) blade provides the perfect blend of aggressive yet smooth cut and sawdust evacuation that resawing requires.
What size band saw for resawing?
To get started with resawing, I recommend a band saw of sufficient power and with a large depth of cut. Any motor smaller than 1hp and depth of cut less than 10″ will limit your effectiveness. (Some 14″ band saws have about a 6″ maximum cutso you’d be limited to a 12″ wide book-matched panel or less.)
Can any bandsaw resaw?
Just about any bandsaw will do acceptable resawing. For example, all the cuts made in this story were done on an inexpensive, 14-in. bandsaw with a 3/4-hp motor. All we did to the saw was add a riser block to increase its capacity.
What should I look for in a bandsaw blade?
Use coarse tooth blades (2 or 3 TPI) for re-sawing and cutting thicker materials. For general wood cutting duties in typical 3/4″ material, use a 4 TPI blade for coarse, fast cutting and a 14 TPI blade for slower, smoother cutting. A blade in the 6 to 8 TPI range provides good general-purpose performance.
How much horsepower do you need to resaw?
A 3/4 or 1 HP bandsaw is pefectly adequate for re-sawing stock at home….
Is a wider bandsaw blade better?
The wider blades are stiffer overall (more metal) and tend to track better on the band wheels than narrow blades. When cutting thicker material, the wider blade has less ability to deviate because the back end, when in the cut, helps steer the front of the blade, especially if the side clearance is not excessive.
How much tension should a bandsaw blade be?
For carbon steel toothed blades (cutting blades) this is typically 15,000 to 25,000 PSI. Slitting type blades typically are tensioned in the range of 12,000 to 20,000 PSI. In general bandsaw blades are never tensioned past 35,000 psi.
Can a band saw cut curves?
Whether it’s a tight curve or a closed opening, you can cut it on your band saw with a couple of easy tricks. Cutting on the band saw can be the same thing. The narrower the blade, the tighter the spots you can cut; in fact, some band saw blades rival a scroll saw for cutting tight curves.
Why does my bandsaw cut crooked?
When the band saw cuts crooked, a dull blade, improper feeding, loose blade tension or not using a work piece guide could be the cause. Use the rip fence or miter gauge to guide the work piece uniformly through the cutting blade to make straight cuts.