AquaSaw C-40 CR from Gryphon – The World’s Most Powerful Fragging Sa. Coral cutting is made easier with the use of this Corrosion Resistant AquaSaw, which is designed for use with salt water. It is based on the regular C-40, but it has enhancements that are intended to reduce maintenance when the saw is used in a corrosive environment, such as one with salt water in it. With the upper blade guide removed, a 3.5″ vertical clearance is provided, allowing for the cutting of most small and medium sized corals. Feature. Construction is straightforward, with only a few moving parts. The motor has a sealed bearing, which increases its resistance to corrosion. Fastest cutting is now possible with a new high-speed motor. There are no belts or pulleys in direct drive. The powerful motor is located on the top of the boat, away from the water. a protective shield is installed around the bottom of the motor to deflect salt water splashe. There is a massive water reservoir beneath the work surface. A work surface measuring one square foot that is free of obstruction. A blade guide beneath the table and a new blade guide above the table. Stainless steel or hard anodized aluminum are used for the metal components. The saw ships with a stainless steel blade, but it is capable of accepting any Gryphon blade. Specification. Mode. Vertical Clearance of the AquaSawAquaSaw X. without the upper guide, 3.5. 5.5″ without the use of an upper guid. Moto. a third of a horsepowe. Direct Drive DC (Direct Drive DC) is a type of drive that uses direct current to drive a motor. Direct Drive at a third of a horsepowe. D. Blade Rotational Spee. 40 mph is the maximum speed. 40 mph is the maximum speed. Area of the Platfor. Coolant System of one square footOne square foot of Coolant Syste. No water is required when using recirculating tap or salt water. No water is required when using recirculating tap or salt water. Moto. Direct Drive DC (third horsepower. a third of a horsepowe. DC Coolant Reservoir with Direct Driv. Tension Adjustment: 10″ x 9″10″ x 9″ Tension Adjustment: 10″ x 9″10″ x 9. Knob with a single positio. Dimensions of a single knob blad. The circumference of the ring is 37 inches wide and 0.14″ deep, and the width and depth are 0.02 inches wide and 0.14″ deep, respectively. One YearOne Year is a long period of time.
