My experience is that a circular saw is larger heavier and more robust, but produces rougher lumber and has more waste. The band saw also runs off a small engine, where the circular saw runs off a larger diesel. Pulling a log through a saw means you’re also placing boards and slabs to the opposite side of the saw, without having to pull it off the top of a log.
Currently, you have four common options for a mill such as portable bandsaw, circular sawmills portable, or stationary, large stationary band sawmills and chainsaw mill. If you are aiming for a hobby, A suggested choice would be to buy a chainsaw mill, or a portable band saw sawmill for a small business. Tool to Use: You have four main options for this: circular sawmill, Large stationary band mill, portable band sawmill, and chainsaw sawmill.
The log dogs that came with the mill hold the log steady, and the mill puts very little pressure on the log. From contributor J: Grade sawing on a swing mill is simple and realistic as *three* faces are show! Half logs can easily be achieved providing that the logs are 20″ and under. The only reason I said I would buy a swing blade is because of the big logs I can’t get on my mill.
I’ve started this thread in response to a request from phill-nz who was wondering why the bandsaw is not well received in New Zealand and asked if I could identify the pros and cons for each type of saw. The two types are the horizontal bandsaw and the circular swingblade saw. Typically the style of mill for the bandsaw would be the Woodmizer and for the swingsaw the Lucas.
bandsaw mill vs circular sawmill Related Question:
Is a bandsaw mill worth it?
A portable sawmill can be worth the investment. It can provide a source of wood for your own projects and give you a side business. For a source of lumber, as well as a profitable business, a portable sawmill can be a key piece of equipment on your farm.
What is the difference between a circular saw and a band saw?
Circular saw machines, or cold saws, use blades that are thicker and more rigid compared to band saw blades, to reduce vibration and provide a better finish. They require more power consumption and a rigid machine structure because they cut wider slots.
What type of saw does most of the work in the sawmill?
Today, industrial-sized band saws are the leading machines in a sawmill.
How long do bandsaw mill blades last?
On average your bandsaw blade should last 6 months to as long as a few years depending on what your cutting with it. Make sure to match your blade strength and quality to the project and material your cutting.
What does it cost to mill lumber?
By the Board Foot Pricing varies by species and location but ranges from $0.25 to $0.50 per board foot of sawn lumber. This pricing method places all of the risk of productivity on the sawyer since the customer is only paying for the lumber they receive.
How much does a good saw mill cost?
A brand new, high-quality mill can cost anywhere from $20,000 – $50,000, whereas a used sawmill can be significantly lower, often from $15,000 – $20,000.
What is the difference in band saws?
The band saw blades are thicker and more reliable than a scroll saw blade. This makes them faster at cutting but makes the cut a bit more coarse. You can’t make super tight turns, like with a scroll saw, but you can use thick wood, which a scroll saw won’t accommodate.
How much does a miter saw cost?
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
What is band saw machine?
A bandsaw (also written band saw) is a power saw with a long, sharp blade consisting of a continuous band of toothed metal stretched between two or more wheels to cut material. They are used principally in woodworking, metalworking, and lumbering, but may cut a variety of materials.
What do sawmills do with sawdust?
In the cold months, the mill uses the sawdust to power its own furnace for heat and to run its kilns that dry the lumber. But when the weather warms up, it sells its supply to dairy farmers for animal bedding and to plants that manufacture wood pellets that are burned in woodstoves and furnaces.
How much does a mill cost?
Generally, the less expensive the mill, the lower the production. New portable sawmills range in price from less than $4,000.00 to over $80,000.00 depending on the amount of production you need.
How did they make boards before sawmills?
Before the invention of the sawmill, boards were made in various manual ways, either rived (split) and planed, hewn, or more often hand sawn by two men with a whipsaw, one above and another in a saw pit below.
How many times can you sharpen a bandsaw mill blade?
You should be able to sharpen your blade two or three times before needing to replace it, but sometimes breakage happens. Blade breakage can result from a range of situations. Common causes of blade breakage include: Dull teeth.
Are bandsaw blades worth sharpening?
Since a carbide-tipped bandsaw blade will cost well over $100, spending a third of the cost of the blade (or more) to get it sharp and working like new again can make financial sense. However the majority of bandsaw blades, the Wood Slicer included, are not worth spending money to have sharpened.
Why do bandsaw blades break?
Machine Defects Even the best blades can fail if there is something else wrong with your bandsaw, and even a small misalignment of bearings or guides can put a twist in the blade as it goes around. Resulting in tension being applied in all the wrong ways which will lead to early breakage.