06-26-2010, 11:16 PM #1 Band Saw Tires – Urethane or Rubber It’s time to change the tires on my Delta Saw and I’m torn between rubber vs. urethane I’m looking for opinions and experience and I’m sure there’s a bunch of it out there. 06-27-2010, 7:42 AM #3 I went with urethane for multiple reasons. 06-27-2010, 10:01 AM #7. 06-27-2010, 8:59 PM #8 As someone who has installed then crowned rubber tires on an old bandsaw, URETHANE!!!
Given this, please assume that any links leading you to products or services are affiliate links that we will receive compensation from. There are millions of products and services on the web, and I only promote those products or services that I would use personally. Any product claim, statistic, quote or other representation about a product or service should be verified with the manufacturer, provider or party in question.
A rubber band saw tire requires glue to keep it in place. Urethane Tires last longer and work far better than rubber tires. You will absolutely see the difference in the performance of your band saw when you upgrade to Urethane Tire.
“I have a Grizzly 17” band saw, can cut wood or metal although I only cut wood on it. Have another Grizzly metal cutting band saw in the metal shop. I recently had to put new tires on the wood saw as the old urethane tires wore out.
Urethane tires may cost more than rubber tires but it’s worth the price. “One thing to make not of is many saws are designed in a way that make urethane tires a non-starter. If you have an older saw or an European saw with flat wheels you will need to use rubber or EPDM tires designed for the saw. The place you have a choice is the modern Asian machines along with most of the Delta 14” cast saws and their clones which have crowned wheels that require a thin tire to conform to the crown, these tires do not need to be crowned themselves. “Regarding gluing some rubber tires are not designed to be glued like T-track or safety tires used for example on the older 20” Delta and Rockwell saw and some Italian saws like Mini-Max and others.
bandsaw tires rubber vs urethane Related Question:
Why are the wheels of band saws fitted with rubber tires?
A primary advantage of rubber band saw tires is that they stretch in place for a perfect fit and offer versatility — they work with virtually any type of portable or stationary vertical band saws. Some rubber tires can even be cut to fit the width of a non-standard wheel.
Can you crown urethane bandsaw tires?
It is possible to put a crown on a urethane tire. You just have to be careful, since there’s less room for error, due to the urethane tire being thin. The extra thickness of a rubber tire makes the crowning operation easier. I have a Walker-Turner 16″ bandsaw that I put urethane tires on and crowned.
What is a urethane tire?
Urethane tires are a found in many different high abuse applications requiring a material that will our perform rubber in any weather condition. Urethane is custom cast into any shape and then machined to any profile. Most commonly urethane tires are found in robots and other automated equipment.
How do you cut polyurethane rubber?
Sawing – Although urethane can be cut with many different saws, a bandsaw is best as longer blades run cooler and avoid melting. A blade with 4 to 10 teeth per inch and a speed around 200 feet/minute should give you a good cut.
What are bandsaw tires made of?
Tires are sold Individually. Rubber tires require bandsaw tire glue for installation. Luxite’s replacement rubber band saw tires are made of quality rubber and are compatible with most models of band saws such as Craftsman, Delta Tools, DeWalt, Grizzly, Parks, Makita, Milwaukee, Powertec, Ryobi, Skil and others.
Why does my bandsaw blade keep coming off?
Blade Tension Is Too Loose The most common reason why the blade is slipping off is that there isn’t enough tension to keep it on. Blades can slowly become loose after years of wear and tear, and eventually, you’ll need to tighten or replace them.
How is a band saw blade tracked?
Tracking describes the in-plane “front-to-back” motion of a bandsaw as it runs on the bandmill wheels. Bandsaw tracking stability returns the sawblade to its initial position after any in-plane side-to-side displacement caused by a cutting force.
What is the difference between urethane and rubber?
Urethanes fill the gap between rubber and plastic. They’re harder than rubber which contributes to their outstanding load-bearing abilities. Yet they’re softer and much more pliable than plastics. This accounts for their outstanding impact resistance and all-around toughness.
Is polyurethane the same as rubber?
From bushings and gaskets to tires and boots, you’ll find a variety of products made of these materials. But polyurethane isn’t the same as rubber. While both materials offer a high level of elasticity and protection from water ingress, though, they aren’t necessarily the same.
Are polyurethane tires good?
Due to its overall toughness, the polyurethane tire will withstand rough floor conditions and debris much better than rubber. Rubber does not exhibit high cut / tear strengths.
Is polyurethane easy to cut?
Redco Polyurethanes can be efficiently machined using conventional machine tools and most woodworking tools. Heavy duty cutting tools must be used due to the friction developed while cutting.
Can you machine urethane?
Polyurethanes harder than 70 Shore A can be machined using processes commonly used for machining metals. Polyurethanes softer than 80 Shore A tend to be too soft for these machining processes and are best machined by methods such as knifing, grinding, sanding, and freezing – using dry ice or liquid nitrogen.
How do you cut thick polyurethane?
Use a utility knife to cut your polyurethane foam to shape. Extract the blade from the knife by using your thumb to push the blade lever up toward the top of the knife. Press the blade into the foam and run the blade down the foam making your preferred cut.