resawing wood with a bandsaw Related Question:
What band saw blade for resawing?
Resawing involves making rip cuts in the face of a wide board. So just like you would on the table saw, you’ll want to select a blade with fewer teeth per inch (TPI) than the blades you use for crosscutting or cutting curves. For most 14″ band saws, a 1 ⁄ 2 “-wide blade with 2-3 TPI is a good choice.
Can you cut logs on a band saw?
For starters, keep the cutting capacity of your saw in mind as you look for wood. It doesn’t do any good to pick up a log or branch if you can’t cut it with your band saw. For example, most 14″ band saws can cut pieces up to 6″ thick.
How thick of wood can a bandsaw cut?
Band saws are the undisputed champ when it comes to cutting curves and slicing through thick material. Many small band saws can slice though lumber a full four inches thick, and bigger saws handle six-inch cuts.
How many teeth do you need to resaw a blade?
Typically, a wide 3-tooth-per-inch (tpi) blade provides the perfect blend of aggressive yet smooth cut and sawdust evacuation that resawing requires.
Can any bandsaw resaw?
Just about any bandsaw will do acceptable resawing. For example, all the cuts made in this story were done on an inexpensive, 14-in. bandsaw with a 3/4-hp motor. All we did to the saw was add a riser block to increase its capacity.
How much HP does a bandsaw need?
With general cutting of thinner stock with minor resawing, typically a 1-1/2 horsepower motor will do the trick. If you plan on making your own veneer by resawing larger exotic hardwood or cutting bowl blanks from a log, consider looking at units with a 2-1/2 to 3 horsepower motor.
How thick can a 9 inch bandsaw cut?
There are several $99, 9 inch band saws on the market in my area (Ryobi, Skill). The are able to cut a thickness of 2 ½ inches.
How do I choose a resaw blade?
For resawing, use the widest 3-tpi skip- or variable-tooth blade your saw accepts. Typically, the wider the blade, the straighter it cuts. Cutting green (undried) wood requires the widest 2–3-tpi skip-tooth blade your saw accepts.
Can I put a wider blade on my bandsaw?
An 18-inch diameter wheel can use a 0.032-inch thick blade that is 3/4 inch wide. In general, thicker and wider blades will be the choice when sawing dense wood and woods with hard knots. Such wood needs the extra strength of a thicker, wide blade to avoid breaking. Thicker blades also deflect less when resawing.
What is resawing lumber?
Re-sawing, the process of cutting a board into thinner pieces of the same length and width, opens up a world of woodworking opportunities. Re-sawing allows you to create wide panels from narrow boards, thin pliable pieces for bent laminations, thin sheets of veneer, and even turn logs into lumber.