You must carefully consider the features peculiar to both the chainsaw mill and the bandsaw mill before you choose either of them. Both a chainsaw mill and a bandsaw mill are used to turn logs into lumber. If you have a portable sawmill that has limited cutting capacities in terms of length, you can add a chainsaw mill to your arsenal, use it to cut down larger logs into manageable sizes, before fitting the smaller log onto your portable chainsaw mill.
A chainsaw sawmill is actually quite different in that it is effectively the enhancement of a standard chainsaw to produce a viable solution for milling lumber. Because of that, bandsaw mills are admired for their low kerf rating, or the small amount of wood lost in each cut due to the thickness of the blade versus a chainsaw blade, which generally produces a rougher cut. Regardless of the wood’s size and density, one very important thing to remember with a bandsaw or chainsaw sawmill is that the blades need to be sharpened regularly.
Guys…. Im ready to get serious but…. Im debating on building a “Pro-Cut” chainsaw mill or buying a used band mill…. I want to saw when I can to start gaining experiance as well as collecting lumber to buiold a timber frame house of aprox 3000 Sq Ft. So Im open for all suggestions…. Home built mill – Milling logs to build a home for the family. If you have plenty of spare time and there is no rush to get things done, then the chainsaw mill will do the job, if you have plenty of time and no money, again the chainsaw mill comes into play again. If you have plenty of wonga, hire in a band mill to do most of the donkey work and finish off with a Ripsaw, which is a superb chainsaw driven band mill or get a medium sized chain mill and do the same, A procut mill is a very good alternative to a band mill, and afterwards you could add a band mill conversion to it with little fuss, check out the many different home made band mills on the WWW, which I have just decided to go down this path myself.
Chainsaw mill will also cut you a more uniform board. If it’s a large amount I would look at a bandsaw, if it’s a few boards a year and you desire a nicer board then a chainsaw mill may be the thing. Chainsaw mill is for cutting oversize slabs …. that is all.
Moving the logs is a key consideration, so the fact you have the means to do that is important if you decide on a bandsaw mill. “I use a chainsaw mill because I have trouble moving logs. I minimize waste by milling everything 9/4, after drying I resaw on my bandsaw in my shop, this is one way I get around the waste factor. I also think I get less warping with my lumber while drying. Last year I milled well over 30 logs with my chainsaw mill, most logs around 7 feet long, but many of them well over 24” diameter. Another option to consider is to get a bunch of logs, move to a site you can mill them, and then hire a sawyer with a bandsaw mill.
If you’re new to milling timber, you’re probably a little confused about some things – namely, the difference between chainsaw and bandsaw mills. Bandsaw mills are very popular these days, and chainsaw mills have maintained a niche in the mill world for their own unique advantages. You may decide between a chainsaw and bandsaw mill solely based on the portability factor, but there are several other factors to consider as well.
There is one situation wherein a chainsaw mill is clearly superior to a bandsaw mill. A chainsaw mill with a huge motor can handle a bar length of 48 or even 60 inches, thus allowing you to mill logs which are beyond the capacity of a more expensive bandsaw mill. Full disclosure: I have a Wood-Mizer bandsaw mill that cost a bit under $40,000, and for occasional use, I employ the Granberg Alaskan chainsaw mill with 48 inch bar that cost about 5% of the bandsaw mill.
I am a chainsaw sawyer, Works for me but I don’t sell my lumber, csm it’s not for everyone. Highly portable, can cary the mill to the log and mill it where it was felled, instead of trying to move, load, and transport a large log. The cons, csm is very very slow and extremely labor intensive.
bandsaw vs chainsaw mill Related Question:
Is chainsaw milling worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
How fast are chainsaw mills?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
What is a bandsaw mill?
A band sawmill is made up of a saw head with 2 band wheels. They have a flexible steel band blade that tracks around the band wheels. It has a frame with a track that guides the saw head through the log. The operator or sawyer pushes the saw head into the log to cut.
How well do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Is milling wood worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
Can you cut logs with a band saw?
In addition, the blade should be as wide as your band saw will allow and have 2-3 teeth per inch. This way, the blade will cut straight without bogging down. Simple Sled. Before you cancsaw the log into boards you need to create a flat surface to ride on the saw table.
How much does a bandsaw sawmill cost?
Band saw mills start at around $4,000 for an entry-level model. A top-of-the-line machine, with a hydraulic loader and attachments for planing and sanding, can handle extra-wide logs. They cost as much as $70,000. Prices for a swing-blade sawmill can range from $6,000 to $40,000, with $20,000 about average.
What is the difference between a saw mill and a lumber mill?
As nouns the difference between sawmill and lumbermill is that sawmill is a machine, building or company used for cutting (milling) lumber while lumbermill is a mill for processing lumber and logs, a sawmill.
What is a chainsaw mill used for?
A chainsaw mill or PortaMill or Alaskan mill or Alaskan sawmill or Logosol sawmill is a type of sawmill incorporating a chainsaw, that is used by one or two operators to mill logs into lumber for use in furniture, construction and other uses.
Can you use a chainsaw on lumber?
Yes, you can use a chainsaw to cut wet wood.
Is it cheaper to mill your own wood?
In the end, only you can decide if milling lumber from your own property is worth it. Because every job is different, we can not tell you the actual amount of money you would save or not save. Generally, it costs 5-10% more to have your lumber milled on-site.
Can you build with fresh cut lumber?
Building with green lumber for timber frame construction can save time, money and energy. With green timber, you can begin building right away without having to wait for the wood to dry, or having the added cost for kiln drying, which uses environmentally damaging fossil fuels during the drying process.
How much does it cost to mill lumber?
By the Board Foot Pricing varies by species and location but ranges from $0.25 to $0.50 per board foot of sawn lumber. This pricing method places all of the risk of productivity on the sawyer since the customer is only paying for the lumber they receive.