These will be cut out on a bandsaw to form templates for each of the billion parts of the horse. I can use the templates to trace out the shape on my stock but what are my options to cut them out…. OK, ok, I know WHAT my options are, I’m just looking for opinions on which options I should consider more than others. I can use a bandsaw to cut out the shapes and finish them up on an edge sander.
A bit of a newbie, but I’d like to start building my own electric guitar bodies. The way I see it done most often is making a close but rough cut with the band saw, then clean it up using a flush trim bit on the table router with the template as a guide. I’m guessing the issue is the thickness of the body blank.
First thing first, before we talk about all the differences between table saw and router table, it is important for you to know that what is a table saw and router table what are their purposes so you can make an informed decision. The main difference between a table saw and a router table is that a router table can mount pins and buts along with being able to cut the wood half. If you just want a basic dovetail then table saw will be able to cut it faster than a router table but if you want to make small details as you go then a router table is your best bet.
A router fitted to a trammel and using a straight or spiral bit helps you cut circles with baby-smooth edges. “Outfitted with a 16″-square jig made from 3⁄4 ” plywood, the bandsaw makes it easy to quickly cut circles. The jig should work on nearly every bandsaw table and accommodates circles up to about 25″ in diameter.
The width of a bandsaw blade can limit the radius it can cut, the number of teeth will have an effect on the smoothness of the cut as well as speed of feed. If you are making 100, the bandsaw is a one cut machine and the blade should easily last. Making incremental cuts is fairly easy with a plunge router but more difficult with a standard router in a circle jig.
A table saw is better for cutting through thicker materials, while a router table is better for thinner materials. A table saw is better for more complex projects, while a router table is better for simple projects. The router tool and stationary table are combined in a router table.
bandsaw vs router table Related Question:
Can you use a router like a table saw?
You can use a router to cut wood, but it’s not typically used the same way a jigsaw is. A jigsaw is often used freehand. A router is always used with a jig or pattern, except when doing edge work where the router bit will have a guide bearing, or you’ll use a fence.
Can a bandsaw replace a table saw?
In general, bandsaws excel at making curved cuts which allows them to replace some of the basic features of a scroll saw. The creative angles they are capable of creating simply cannot be replicated by the large, circular blade of a table saw. Bandsaws also tend to offer more versatility.
Is a band saw safer than a table saw?
Since the blade is so narrow and it cuts downward, it has the advantage of essentially keeping the workpiece solidly on the table as you make the cut. This makes the bandsaw inherently safer than a table saw for most cuts. Making a rip cut on the band saw is a breeze, with the right blade.
Can you use a router on a 2×4?
Cutting a 2×4 with a router and 1/2″ bit would require between 6 and twelve passes, depending on the shank size of the bit, with associated depth adjustments between each pass.
Can I use a router on plywood?
Yes, you can use a router on plywood, but ok depends entirely on your definition of “ok”. If there are no voids in the plywood, then it may not be terrible, but in my opinion as a woodworker, I’d rather see it edge banded with some type of hardwood. You can use a router on that and it will turn out quite nicely.
Can any router be used in a router table?
Can you mount any router to a table? Almost any fixed base or plunge router can be mounted to a router table by drilling holes in the router table insert. While this excludes the compact routers like a trim router, this flexibility allows for older routers to be mounted in a table.
Do you need a router plate?
A router plate is a convenience. Not a necessity. It provides a means to remove the router from the table for such things as bit changes. If one has a router that can be left in the table (i.e. a dedicated router) and has a router lift that allows raising the router to change bits, then the plate is not necessary.
Are band saws useful?
A band saw can be used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.
Can you rip wood with a bandsaw?
A band saw can shape curves, saw rough lumber safely, cut joinery, and even rip boards to width.
Can I put a drill bit in a router?
A great use for drill bits is to use them to set the depth of router bits! All you need is 2 drill bits that are the same size (I used 6mm bits) and a flat surface. First, place the 2 drill bits on the flat surface slightly spaced apart. Then loosen the base of the router so you can raise and lower the bit.
How deep can a router cut?
Plunge is the change in height which the router body will descend to the base plate, on some machines this actually projects the collet below the base-plate – useful in some cases. Plunge depths vary between models, it can range from 2 to 3.5 inches.
Does plywood router dull bits?
Router bits, even those tipped with carbide, dull faster than you might expect. It happens quickly in solid wood, and even more quickly when you work with plywood and other resin-filled sheet goods.
Can you router painted wood?
Technically, yes, but in reality, no. 1) The paint would need to be really thick to not cut through the second layer. 2) Your boards would need to be perfectly flat, and uniform in thickness to within about .
Can a router cut through 3 4 plywood?
You can easily cut through 3/4″ plywood with a trim router, but if I were doing it I wouldn’t take more than 3/16″ at a time. Just take your time with multiple passes and you’ll be fine.
Do all routers fit all router tables?
Have you ever wondered why all router table inserts are different sizes? The tables sizes are all roughly the same but the inserts and lift sizes are all slightly different. The reason is so that you stick with one brand when you buy it since it will fit nothing else.