6″ x 48″ Premium Aluminum Oxide Sanding Belt Name: 6×48 Aluminum Oxide Sanding Belts Description: 6 In. x 48 In. Sanding Belts feature aluminum oxide grains coated on premium X-weight poly/cotton backing and fastened into a belt using a bi-directional, high strength butt joint. Aluminum Oxide sanding belts are best used for general purpose sanding, grinding, deburring or blending. These 6″ x 48″ are designed for sanding on a 6×48 combination sander, benchstand sander, and/or back stand belt sander and are available in 36 grit, 40 grit, 60 grit, 80 grit, 100 grit, 120 grit, 180 grit, 220 grit, 320 grit, 400 grit, 600 grit, 800 grit and 1000 grit.
“The G1014Z 6″ x 48″ Belt / 9″ Disc Combination Sander can be used to smooth the faces, edges, or ends of workpieces using the sanding belt or the sanding disc. Parts and accessories for the combination sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. SPECIFICATIONS:Motor: 3/4 HP, 110V/220V, single-phase, 12A/6A Sanding belt size: 6″ x 48”. Sanding disc speed: 2450 RPM. Sanding disc type: PSA. Disc sanding table size: 6″ W x 12-1/4″ L. Disc sanding table tilt: 0°-45°.
belt sander 6 by 48 Related Question:
What is the standard size for a belt sander?
SIZE. The size of a belt sander is measured by the width and length of the belt. Belts range in size from small, detail-type sanders with belts that are only an inch or two wide to heavy-duty 4″ x 24″ machines. A common size for home shop use is a 3″ x 21″ sander.
What size sanding belt do I need?
dimensions listed width/length) Wrap it around the belt sander the same way you would put a belt on it. Cut the string so the ends meet up and then measure the string from end to end. To determine the width of the belt, you can measure the width of the roller or contact wheel the belt will run against.
What is the best speed for a belt sander?
The optimal speed for belt grinders is largely dependent on a number of factors, including type of abrasive grain, grit grade, workpiece material, and more. Generally speaking, a safe speed in most cases is 3,000 surface feet per minute. You can calculate surface feet per minute using the formula SFPM = RPM X .
How do I choose a sanding belt?
Choosing the Right Sanding Belt Grit The heavier the job, the coarser the sanding belt you’ll need. 40 to 60 grit is best suited for the heaviest work. When you’re performing tasks such as smoothing surfaces or removing minor blemishes, you’re better off using sandpaper with 80 to 120 grit.
Should you push down on a belt sander?
You do not have to push down on the sander. Pull the sander backward letting the weight and sharpness of the belt cut the surface. Don’t pull back and then tip the sander off the edge or you’ll cut off too much wood and need to build it back up with putty.
Can you use a belt sander against the grain?
Because they have a lot of power and can handle coarse grits, they excel at the rapid removal of wood. Also, unlike orbital and vibrating sanders, the sanding action is linear, so even with coarse grits you can sand with the grain and get a good-looking result.
When should I use a belt sander?
Belt sanders are highly effective tools for removing roughness and preparing woodwork for less aggressive tools in the process like random orbit and finishing sanders. It is crucial to belt-sand with the wood grain rather than across it. Otherwise, the belt sander’s lateral action can ruin the work.
How many RPM is a belt grinder?
Belt Sander/Grinder provides motor speed of 3,600 rpm.
How do I determine my belt speed?
Calculate the belt velocity by multiplying the circumference of the pulley by the speed of the pulley. For example, the drive pulley has a circumference of (Pi)(D2). This equals 2(Pi). The speed of the pulley is 1,800 rpm.
What’s better orbital or belt sander?
A belt sander is more effective for large materials, while the orbital sander is ideal for small spaces and pieces of furniture. A belt sander works effectively on flat surfaces, while an orbital sander can work with various angles.
Which is coarser 150 grit or 60 grit?
Coarse grits are typically in the 40- to 50-grit range. Medium sandpaper, ranging from 60- to 100-grit, accommodates some final shaping. Primary sanding of rough wood and the removal of planning marks on wood is often best done with medium-grit sandpaper. Fine sandpapers range from 120- to 220-grit.
What is a 1 inch belt sander used for?
The H3140 1″ x 30″ Belt Sander provides a moving abrasive surface that can be used to shape and contour small workpieces. By tilting the adjustable table, sanding operations can be performed on miter-cut, or other angled workpieces.
What size belt do I need for 38 waist?
Size 34 waist choose a 36 size belt, 36 waist choose a size 38 belt, 38 waist choose a size 40 belt, etc. If you wear an odd size pants, say a size 35, and sticking with the 1-2″ rule, you would choose a size 36 belt.