Knowing what grit sandpaper for deck sanding can get you halfway to your desired results. In any case, you must know the proper grit sanding paper to use for the best sanding. You could use 20 to 50 grit sandpaper for the first pass and finish with 60 to 80 grit sandpaper for the final pass on an orbital or belt sander.
How many grit sandpaper for deck sanding you need depends on the kind of deck wood. Use progressively finer sandpaper is the best grit sandpaper for redwood deck. Using sandpaper grit for sanding deck with finer grit will cause the pores to shrink, decreasing the amount of material the wood will take.
One of the most frustrating problems that can crop up when you decide to stain or restain your deck is that the stain doesn’t absorb into the wood correctly. When sanding any type of wood to prepare for a new coat of stain, you have to be ultra-careful with how much you sand the wood and the level of sandpaper grit you use. Simply sand the wood again and make sure to properly clean and brighten it before reapplication of your stain.
If you need to sand the handrail or corners of a deck, then you’re on the right track with an orbital sander. Although you know how to best sand your deck now, you probably still have a few questions about the sanding process and the best sanders for the job. Using a random orbital sander is by far one of the most efficient and smoothest ways to sand your deck.
belt sander grit for deck Related Question:
What grit should I use to sand my deck?
Sand the Deck Use 60- or 80- grit sandpaper on the main deck boards, and use 80- or 100-grit on the handrails. After sanding, vacuum the deck thoroughly to ensure that dust does not settle on the new finish.
Can I use a belt sander on my deck?
Can you use a belt sander on a deck? Using a belt sander on a deck is one of the great ways to sand your deck. So ‘yes” I would definitely use a belt sander on a deck. Just make sure you go in the direction of the timber.
Can I use 120 grit to sand my deck?
The recommended level is to have two passes using an electric sander. For the first pass, you can start with an 80-grit paper, and on the second pass, use a 120-grit paper. Pick a finish of your choice to seal the deck once you are done with the final sanding.